Operating instructions

- Operation -

7.10 Playing back notes

 Make sure that the HOLD slide switch is in the OFF position (slide switch down).

 Press the PLAY/STOP button once.

 Select the required archiving folder A, B, or C.

 Now select the required message using the

and buttons. The number of the note

will be shown in the display.

 The note will be played back after pressing the PLAY/STOP button.

 You can pause the playback with the PAUSE/HEAR button and then continue with the

PAUSE/HEAR or PLAY/STOP button.

 Press the PLAY/STOP button to stop the playback.

1 Current recording folder A, B or C

2 Quality HQ=Premium, LP=Standard

3 Number of recording

4 Playback running

5 Current playback time

6 Progress indicator

Notes:

o The volume can be adjusted in 20 steps by means of the VOL double switch on the right-

hand side.

o If you want to fast forward or fast rewind within a long note, please hold the or

buttons pressed. After 10 seconds, fast winding will take place in steps of 10 seconds.

o If you want to jump forwards or backwards between different notes, press the or

buttons BRIEFLY several times.

o You can check the remaining length of the message while the message is being played

back. To do this, hold the PAUSE/HEAR button pressed for 2 seconds and the display will

show the remaining length in minutes and seconds for ca. 10 seconds.