User`s manual

4 indication of field strength (max. 4 bars)

As soon as you enter the setup menu by pushing the set key, the display

changes to show information related to the selected menu item. For fur-

ther display details refer to the description of each menu item in section

'Setup menu' starting from page 24.

Note

· After 10 minutes without any user interaction the 'display saver' is

invoked automatically. The display then shows only the station name

(if supported by the station, otherwise the frequency) or the radio

text. Please refer to section 'Set Dim Level' on page 28 for further in-

formation on the 'display saver' mode.

6.8 Switching frequency bands

Press key set on the front panel longer than 2 seconds to toggle between

FM and AM reception. The display indicates the current reception mode

(see section 'Display' on page 16).

Tip

· You can directly select the reception mode with the optional Audio-

net System Remote Control Harmony One. Press key FM on screen

2 to switch the CAT to FM reception. Press key AM to put the CAT

into AM reception mode (see section 'Screen 1' on page 37).

6.9 Automatic search

Start the automatic search in the corresponding direction by holding

down the key up or down on the front panel for longer than 2 seconds.

With the optional Audionet System Remote Control Harmony One please

use keys Ch+ and Ch- .

If the next station is found, the search stops automatically. It also stops

manually at the current position if you use keys up / down or Ch+ /

Ch- again.

Note

· While the CAT is in Preset mode, the keys up and down or keys

Ch+ and Ch- switch between the Presets. Put the CAT into