User`s manual

While in Direct Frequency Input mode please follow these rules:

· Only frequencies in the range from 87.50 MHz to 108.00 MHz are

allowed. Therefore, only digits 8, 9 or 1 are permitted as first digit.

All other entries are ignored.

· It is not necessary to enter a leading zero (for frequencies below

100 MHz). Simply press 8 or 9 . The CAT automatically adds the

leading zero. Example: Press 9 6 5 0 to enter the frequency of

96.50 MHz.

· To enter frequencies greater than 100 MHz press 1 for the fist digit.

The CAT automatically recognizes the input as 10. You are spared

from unnecessary inputs. Example: Press 1 6 7 0 to enter the

frequency of 106.70 MHz.

· During FM reception the smallest possible frequency step is 50 kHz,

hence the last digit of the frequency has to be 0 or 5. Press digit key

0 to enter a 0. Any other digit key enters automatically a 5 as last

digit.

Note

· Direct Frequency Input mode is only available using the optional

Audionet System Remote Control Harmony One.

· This function is only available in FM reception mode.