User`s manual

21
7 Presets
The CAT offers up to 99 presets to save stations. Each preset comprises
the reception mode (FM or AM) and the frequency of a station. Preset
numbers can be selected freely in the range from 1 to 99.
7.1 Save preset
Tune the CAT to the station you would like to save into a preset. For
details on how to tune to a station please refer to section 'Automatic
search' on page 17, to section 'Manual search' on page 18 and to section
'Direct frequency input' on page 18. Now press the set key on the front
panel 3 times for less than 2 seconds until the display reads:
SAVE PRESET: 0_
Use the up and down keys to select the 2
nd
digit of the preset number.
Hold down the set key longer than 2 seconds to acknowledge the 2
nd
digit
of the preset number. Now use the up and down keys to adjust the 1
st
digit of the preset number.
Keep set pressed for longer than 2 seconds to acknowledge the 1
st
digit.
The preset number is now entered completely. The 2
nd
line of the display
now reads:
SET = save
If you are sure to save the current station to the selected preset number
hold down the set key longer than 2 seconds to save.
In case you would like to save the current station to a different preset
number then just press key set shortly (less than 2 seconds) and start the
selection procedure again.
Note
· You can always exit the save dialogue by pressing the set key
shortly.
Tip
· It is much more comfortable to save a station using the optional
Audionet System Remote Control Harmony One. Just press key
Save Preset on screen 2 of the device menu CAT (see section
'Screen 2' on page 37).
The display reads:
SAVE PRESET: _ _