User`s manual

Change any setting of a menu item by using the keys up and down on the

front panel or Ch+ and Ch- of the Audionet System Remote Control

Harmony One.

Tip

· All settings of the setup menu can be dealt with by using the keys on

the front panel. However, if you prefer to change settings from the

comfort of your listening chair, please use the Audionet System Re-

mote Control Harmony One. For more information about the remote

control and its usage see section 'Audionet System Remote Control'

on page 33.

Note

· If you make no adjustments for longer than 12 seconds the CAT

automatically leaves the setup menu and returns to normal operating

mode.

· While you are in the setup menu the display brightness is set to 100%

for better readability. After leaving the setup menu the display

brightness is automatically reset to its user selected level.

· If you power down the CAT to stand-by mode all settings are stored

automatically in the non-volatile memory of the unit. Even after dis-

connecting from mains power the CAT still remembers your settings.

· The key Set or Menu of the Audionet System Remote Control

leads directly to the menu item 'Set FM-Input'. Navigate to each next

menu item by pressing the key Set or Menu (the figure on page

24 shows the order of the menu items).

· Access menu items 'Set RDS Option', 'Set FM-Receiver', 'Set Dim

Level' and 'Set Mode' directly by using the corresponding key of the

Audionet System Remote Control. Consult section 'Audionet System

Remote Control' on page 33 for details.

In the following all options of the setup menu are explained in detail.