User`s manual

14
by the operating system of your computer, e.g. Windows XP
*1
. Use a
standard audio player (e.g. Windows Media Player
*1
) to playback
your music through the ART G2.
Via an optional adapter cable the USB input can be used as SPDIF
input for connecting CD players, DAT recorders etc. (refer to section
'USB/SPDIF digital audio input' on page 16).
5.3 Digital output formats
Important
· In order to use digital outputs OUT 1 to 4 and DATA LINK of your
ART G2, the option Set Digital Output Mode has to be set to
either LowBit Mode or HighBit Mode. If you selected setting di-
sabled all digital outputs of the ART G2 are switched off (refer to
section 'Set Digital Output Mode' on page 55).
Please refer to the following table to determine which digital format at
which sample rate and resolution is available at the digital audio outputs.
The decision whether to use the HighBit or the LowBit mode depends on
the kind of digital receiver unit your ART G2 is connected to.
Digital
Output
Mode
DATA
LINK 9
OUT 1 10
SPDIF
OUT 2 11
SPDIF
OUT 3 12
AES/EBU
OUT 4 15
optical
LowBit
Mode
44.1kHz / 16bit
Stereo
PCM
44.1kHz / 16bit
Stereo
PCM
44.1kHz / 16bit
Stereo
PCM
44.1kHz / 16bit
Stereo
PCM
44.1kHz / 16bit
Stereo
PCM
HighBit
Mode
192kHz / 24bit
Stereo Upsampling
Audionet High Bit
Mode
192kHz / 24bit
Stereo Upsampling
Audionet High Bit Mode
96kHz / 24bit
Stereo
Downsampling
PCM
44.1kHz / 16bit
Stereo
PCM
disabled no signal no signal no signal no signal no signal
*1
'Microsoft Windows' and 'Windows Media Player' are registered trademarks of Microsoft Cor-
poration and were only used for information purposes.