User`s manual

6 Usage

6.1 Switching on and off

Please make sure that the ART G2 is connected to your (pre) amplifier

and to the mains correctly (refer to sections 'Installation and ' on page 9

and 'Outputs and inputs' on page 12). As soon as the ART G2 is con-

nected to the mains, the display lights up with the Audionet logo followed

by a welcome text. After that the display stays dark. The unit is now in

stand-by mode.

Switch on the unit by pressing the power key at the front panel. The

ART G2 shows the message Waking up....

In case the mains plug has the incorrect polarization a warning is issued

in the display (refer to section 'Orientation of mains plug' on page 10).

If the cover is open the display reads Open. If you switch on the unit with

the cover closed and no disc inserted the message No Disc will appear

in the display after a short moment.

Please refer to sections 'Inserting and removing discs' on page 25 and

'Playing discs' on page 37 for how to insert, remove and play discs.

If you would like to switch off the unit, press the power key on the front

panel. The display will show Going to sleep.. while powering down

the unit. Now the display is dark, and the ART G2 is in stand-by mode.

Note

· In case option Set AutoPlay is set to power on only or

power on & disc change (refer to section 'Set AutoPlay' on page

57) the ART G2 switches on automatically after connecting it to

mains and starts playing any inserted CD.

· Of course, you can switch on/off the ART G2 with the included re-

mote control as well as with the Audionet System Remote Control

Harmony 785. Please refer to sections 'Remote control' on page 27

and 'Audionet System Remote Control Harmony 785' on page 29.

· In case you should try to switch on the unit while the cover is open,

the ART G2 will issue the message:

► Attention: ◄

► Close cover before ◄

► switching on!! ◄

to ask you to close the cover. Only if the cover is closed you can

switch on the unit!

· If you open the cover during power-up, the ART G2 interrupts the

process with the warning:

► Attention: ◄

► Keep cover closed ◄

► during power up!! ◄

Now close the cover, and switch on the unit again!