User`s manual

Note

· If you open the cover during playback the ART G2 takes a short

moment to bring the disc to a complete stop. Please wait until the disc

stops turning before you remove the disc.

· The cover has to be closed completely in order to playback a disc.

· Always use the included stabilizer to fix the disc on the spindle. Oth-

erwise the disc and/or the unit might suffer damage.

· Never load more than one disc at a time, and never use any additional

stabilizers!

· Do not use any non-standard shaped discs available on the market

because it may damage the unit.

· If you set the option Set AutoPlay to disc change only or

power on & disc change, the ART G2 starts playback auto-

matically as soon as you inserted a disc and closed the cover (refer to

section 'Set AutoPlay' on page 57).

6.3 Control elements on the front panel

The front panel has 4 keys for controlling the ART G2 (refer to section

'Overview ' on page 7). With these keys you can control all basic play-

back functions as well as all setup options in the Global Setup menu.

power Switch on /off the unit.

stop / set Push the key shortly to stop playback. Keep the key

pushed for at least 2 seconds to enter and navigate

through the Global Setup menu.

back / pause Push the key shortly to skip back to the beginning of the

current track. Push the key again to skip to the start of

previous tracks. Keep the key pushed for at least 2 sec-

onds to pause playback. To continue playback press the

key for at least 2 seconds again.

play Press key once to skip to the beginning of the next track.

Press again to skip to the start of further tracks.