User`s manual

8 Audionet System Remote Control

Harmony 785

Every function of the ART G2 is accessible via the Audionet System

Remote Control Harmony 785. Additionally, up to 14 other devices can

be controlled by the Harmony 785.

Press key Devices to enter Device Mode. The display now lists all

devices included in the current configuration of the Harmony 785. Select

ART G2 from the list to set the Harmony 785 to controlling the

ART G2. Device Mode gives you access to all the possible commands to

control your ART G2. The following explains all these commands.

Important

· During everyday use, you should never need to use the Device Mode

of your Harmony 785, but control the ART G2 (and other devices of

your audio setup) by customizing your Activities. For detailed infor-

mation on how to customize and use Activities on your Harmony 785

please consult the separate user's manual that came with your Har-

mony 785.

1 Power key for use with Activities, turns all devices off that are in-

cluded into the current Activity. See separate user's manual of Har-

mony 785.

2 Activities key: Press this key to view a list of Activities you have

added. Press the button next to the Activity you want to select, and

the Harmony 785 will control your entertainment system (see sepa-

rate user's manual of Harmony 785).

3 Devices key, lists all the devices on the display, and allows your to

select and directly control any device included in the configuration of

the remote control (see separate user's manual of Harmony 785). Se-

lect ART G2 to enter Device Mode for controlling the ART G2.

PRE1 G3

VIP G3

SAM

1 OF

12:45

Devices

ART G2

CAT

MAP V2