User`s manual

4 Depending on the operational mode, the display of the Harmony 785

shows a list of Activities or Devices, help or infrared commands and

any available listings. If a list exceeds one screen page, use the arrow

keys beneath the display to browse through the available pages. Press

the button next to the text to select or activate the corresponding item

or function (see also separate user's manual of the Harmony 785).

Important

· The Power key is only available for Activities. In Device

Mode the Power key has no function.

· Even without using an Activity, the user is able to control all

functions of the ART G2 using the Harmony 785 in Device Mode.

· The keys described below to control the ART G2 refer to the fac-

tory default programming of the Audionet System Remote Con-

trol Harmony 785. Understandably, any changes done to this

setup by the user cannot be discussed here.

Tip

· In order to switch the ART G2 on/off, without using an Activity,

please use the keys Power On , Power Off and/or

Power Toggle on screen page 3 (see section 'Screen page 3' on

page 35). Of course, it is possible to control the ART G2 without any

Activity, but to tap the full potential of the Harmony 785 you need to

configure Activities customized to your needs (please refer to the

separate manual of the Harmony 785).

Note

· Please read the separate user's manual to your Audionet System Re-

mote Control Harmony 785. Activities, Devices and Device Mode as

well as customizing the remote control are discussed there.