User`s manual

10 Playing discs

If the ART G2 is not switched on yet, press the power key on the front

panel or the key STBY of the remote control or keys Power On or

Power Toggle of the Audionet System Remote Control Harmony 785,

to switch on the unit.

Open the cover on top of the unit by pushing it to the back.

Put a disc onto the spindle with its printed side facing up. Fix disc with

included stabilizer ('Puck'). Please make sure that the stabilizer gives the

disc a centred and level position.

Important

· Never load more than one disc at a time, and never use any additional

stabilizers!

Press key play on the front panel or PLAY of the remote control or 4

of the Audionet System Remote Control Harmony 785, to start playback.

10.1 Playable disc types

The following disc types are suitable for playback:

Audio-CD

CD-R

Discs of types CD-R can be played back if they were recorded in the

Audio-CD format. Due to characteristics of the disc or recording condi-

tions, in some cases playback might not be possible.

Important

· Possibly, some Audio CDs not compliant to the Red Book standard

will not play correctly or not at all on the ART G2. Particularly copy-

protected CDs often violate the standard. Please notice the logos and

notes on the CD and/or booklet.

· If you playback a DTS

Music CD with the ART G2, all analog

outputs will always and the digital outputs DATA LINK 9 ,

OUT 1 10 , OUT 2 11 and OUT 3 12 will output in HighBit

mode a high level noise, that might damage your speakers!

DTS and the DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.