User`s manual

· Make absolutely sure that you playback DTS Music CDs via a

DTS-compatible AV (pre) amplifier only. The AV (pre) amplifier

has to be connected to the digital output OUT 4 15 of the

ART G2. If you use a different digital output of the ART G2, the

option Set Digital Output Mode must be set to LowBit

Mode!

· DTS Music CDs are usually marked:

Note

· The ART G2 can playback audio recorded on CD-G, CD-EXTRA

and CD-TEXT discs.

Tip

· Connect your ART G2 to an Audionet (pre) amplifier with Audionet

HighBit Interface using digital output DATA LINK or OUT 1 &

OUT 2. Make a second connection from digital output OUT 4 of the

ART G2 to the optical digital input of the Audionet (pre) amplifier.

The advantage of this setup is, that you can leave the digital output

format of the ART G2 set to HighBit mode. Listen to normal audio

CDs in HighBit mode with all your preferred settings for 2-channel

playback.

In case you want to listen to a DTS Music CD, you simply switch

your Audionet (pre) amplifier to its optical digital input. All your pre-

ferred settings for multi-channel playback will be recalled automati-

cally so you can enjoy listening to your DTS Music CD without any

interference.