User`s manual

Total Time

Track min sec

► 05 17 : 55

u Select Track t

Track min sec

u12t 47 : 53

Total Time is the total playback time of the current disc.

Note

· During playback of a playlist the total playback time of the playlist

Prog. Time is displayed instead of the total playback time To-

tal Time of the current disc.

11.2 Direct track access

For direct access of a track use the digit keys of the remote control or the

Audionet System Remote Control Harmony 785. First enter the second

digit of the track number then the first digit. To start playback of the se-

lected track press key PLAY or 4 of the remote control or the key

# enter (Audionet Harmony 785 only).

The display shows the selected track number and the start time of the

track in minutes and seconds.

Example:

You would like to listen to track No. 12. First press key 1, then 2 to select

the track. The time display shows 47 : 53, i.e. Track 12 starts at 47

minutes and 53 seconds. Now press PLAY, 4 or # enter to start

playback of track 12.

Note

· If you enter a track number that is not included on the disc the display

shows 00:00 for the start time. If you press now PLAY, 4 or

# enter to start playback the ART G2 issues the warning

u Track out of range! t

to let you know that the selected track number is not available on this

disc.

· If you compiled a playlist and select a track that is not part of the

playlist the ART G2 issues the warning

u Track out of range! t