User`s manual

47
u Edit Program t
Track 02 ž 19 of 19
Prog. Time: 47 min 13 sec
Add Track: 07
11.8 Compiling a playlist
Use this function to compile a playlist. Tracks will be played back in the
order they were programmed into the playlist.
Press key PROG of the remote control or key Program of the Audio-
net System Remote Control Harmony 785 to enter the program mode for
compiling a playlist. While in the program mode the display offers the
following information:
Line one of the display indicates that the ART G2 is now in program
mode.
The second line shows the number of current program step and the total
number of program steps of the playlist. Additionally, the number of
track currently occupying the current program step is indicated. In the
example above the playlist consists of 19 program steps at all, and step 19
is occupied by track no. 2.
Line no. 3 informs you about the total playing time of the playlist. In the
example above the total playing time is 47 minutes and 13 seconds.
The fourth line shows the number of the track currently selected to be
added to the next program step of the playlist. In this example it is track
no. 7.
Now there are two different ways to add a track to the playlist.
Use the keys 9 and : of the remote control or the keys 9 and :
of the Audionet System Remote Control Harmony 785 to select the de-
sired track. Check your current selection by looking at line 4 of the dis-
play.
Alternatively, use can use the digit numbers to enter the desired track
number directly. With each entry of a digit the old digits are shifted one
step to the left, so type the 2
nd
digit of the desired track number first, then
enter its 1
st
digit.
Example: To enter track number 25 press the following keys:
Key Line 4 of display
-
Add Track: 01
2
Add Track: 12
5
Add Track: 25
To add the selected track as described above to the playlist press key
PROG of the remote control or key # enter of the Audionet System
Remote Control Harmony 785.
Line 2 of the display proves now that the track was added successfully to
the playlist: The total number of program steps was increased by one.