User`s manual

u Edit Program t

Track 15 ž 15 of 15

Prog. Time: 75 min 41 sec

Erase Track: 01

Now add all other tracks you like to the playlist as described above. The

playback order corresponds to the programming order.

Note

· If you compiled a playlist and the program playback mode is active

while the disc is stopped, the total program (playlist) playing time

Prog. Time is indicated in the display instead of the total disc play-

ing time Total Time.

· Of course, you can program one track several times to different pro-

gram steps. The playlist is only limited to a maximum of 99 program

steps or a maximum playing time of 99 minutes and 59 seconds. If

the maximum number of program steps or the maximum program

playing time exceeds during programming the ART G2 will issue the

warning

Program full!

to let you know that you cannot add the currently selected track.

· Please refer to section 'Edit a playlist' on page 50 for how to erase

single tracks from the playlist.

Tip

In case you would like to playback a whole disc besides only some very

few tracks you dislike, press key Erase or * clear of the Audionet

System Remote Control Harmony 785. Now, all tracks of the disc are

added automatically to the playlist. Contrary to the method explained

above, you now just enter the tracks that will be deleted from the

playlist of all tracks of a disc.

Please note the 4

line of the display. For this mode it now reads Erase

Track.

Example:

Your currently inserted disc consists of 15 tracks. As you dislike track

numbers 3 and 7, you would like to compile a playlist that consists of all

tracks but numbers 3 and 7.

Press key Erase or * clear of the Audionet System Remote Control

Harmony 785 to add tracks of the disc to the new playlist and enter Erase

mode.

Now press keys 0 , 3 , # enter , 0 , 7 and # enter to erase

tracks 3 and 7 from the playlist.