User`s manual

Prog:

Track Time

02/17 Track min sec

► 19 32 : 17

To start playback press PLAY or 4 . The tracks will be played back in

the programmed order: 1,2,4,5,6,8,9,10,11,12,13,14 and 15.

Note

· Any existing playlist has to be deleted prior to using this function

(refer to section 'Delete a playlist' on page 52).

Important

· This function is only available if you use the Audionet System Re-

mote Control Harmony 785!

11.9 Playing a playlist

As soon as you finished compiling a playlist you can start playback by

pressing key PLAY of the remote control or key 4 of the Audionet

System Remote Control Harmony 785 or key play on the front panel.

Playback starts now with the first track programmed into the playlist.

The display indicates playlist playback by the symbol Prog: in the up-

per left corner. Directly below you will find the number of the current

program step and the total number of program steps of the playlist:

In the example above track no. 19 is playing. This is step 2 of 17 in the

playlist.

Note

· If the random play function is active symbol Prog: is replaced by

symbol Random in the display. Nevertheless, the number of the cur-

rent program step playing and the total number of program steps in

the playlist is still indicated.

· If you stop playback the playlist still resides in the memory. If you

start playback again, the playlist will be played again.

· To delete a playlist, please refer to section 'Delete a playlist' on page

52.

· If you would like to stop playing a playlist during playback and re-

sume normal playback press key PROG of the remote control or key

Program of the Audionet System Remote Control Harmony 785.

Playback continues from current track to the end of the disc in normal

playback mode.

If you like to start playback of the playlist still in memory again stop