User`s manual

12 Setup menu Global Setup

If you hold key stop / set on the front panel for longer than 2 seconds,

you enter the Global Setup menu of the ART G2. Press and hold key

stop / set for longer than 2 seconds again to advance to the next menu

item. After the last option you leave the menu. To adjust an option use

keys back / pause and play.

Order of options in the Global Setup menu:

Set Display Brightness

Set Digital Output Mode

Set AutoOff

Set AutoPlay

exit menu

Tip

· All options of the Global Setup menu can be adjusted using the

keys of the front panel, but much more comfortable is the (optional)

Audionet System Remote Control Harmony 785 (refer to section

'Audionet System Remote Control Harmony 785' on page 29).

Note

· You can enter the Global Setup menu at any time by holding key

stop / set for longer than 2 seconds, even during playback.

· If you adjust an option of the Global Setup menu during playback,

pressing key stop / set shortly (less than 2 seconds) will still stop

playback (refer to section 'Playing discs' on page 37).

· If you make no adjustments for longer than 12 seconds the ART G2

will leave the Global Setup menu automatically.

· During adjustments of the display brightness is set to 100% for better

readability. After leaving the menu the user selected brightness level

will be restored.

· If you switch off the unit to stand-by mode all adjustments will be

stored in the non-volatile memory of the ART G2. Even after discon-

ê = hold stop / set longer than 2 seconds