User`s manual

necting from the mains your ART G2 will still remember your set-

tings.

In the following the options of the Global Setup menu are explained

in detail.

12.1 Set Display Brightness

To adjust the brightness of the display of the ART G2 press key stop / set

long once. Use keys back / pause and play to adjust the brightness.

Important

· Long-term usage of the display set to maximum brightness (set-

ting 100%) may cause extended signs of wear resulting in a decay

of contrast or brightness of individual dots in the display. Do not

use the display with a brightness set higher than the factory de-

fault setting of 50% over a longer period of time.

Note

· Is the brightness set to Off the display is only on during setup ad-

justments and will switch off several seconds after the last entry. The

same applies for direct track access, time search and skip-

ping/searching.

· If the disc is stopped, the cover opened or no disc inserted while the

cover is closed, the ART G2 automatically activates the display saver

after 10 minutes without user entry.

· During active display saver, all messages will be displayed at 25%

brightness and varying locations in the display changing every 12

seconds to prevent any 'burn-in' effects of the display.

· During active display saver, the total playing time is displayed in the

form 16Tracks 74min 03sec while the disc is stopped.

Tip

· If you own the Audionet System Remote Control Harmony 785 press

key Dim Display screen page 3 to branch directly to option Set

Display Brightness. Use keys 9 and : to adjust the bright-

ness of the display.