User`s manual

15
3 Vol+ , increases the volume of the MAP V2 while in RUN mode. If the MAP V2
is in one of the setup menus, use Vol+ to select a setup option of the current menu
item. This key has the same function as the key up on the front panel.
4 Ch+ , switches to the next input channel while in RUN mode. If the MAP V2 is in
one of the setup menus, Ch+ goes back to the previous menu item.
5 Vol- , decreases the volume of the MAP V2 while in RUN mode. If the MAP V2
is in one of the setup menus, use Vol- to select a setup option of the current menu
item. This key has the same function as the key down on the front panel.
6 Ch- , switches to the previous input channel while in RUN mode. If the MAP V2
is in one of the setup menus, Ch- proceeds the next menu item.
7 Press Mute to toggle muting. Muting and de-muting is done softly, i.e. volume
will decrease/increase slowly.
Screen page 1
Use keys on screen page 1 to access one of the 5 digital audio inputs or the analog 8
channel input directly. See back panel layout to find corresponding input jacks (see
section 'Overview of connections').
1 Select digital audio input DIGITAL IN 1 10 directly.
2 Select digital audio input DIGITAL IN 2 10 directly.
3 Select digital audio input DIGITAL IN 3 10 directly.
4 Select digital audio input DIGITAL IN 4 9 directly.
5 Select digital audio input DIGITAL IN 5 10 directly.
6 Select 8 channel analog audio input ANALOG 8 CHANNEL INPUTS 11 directly.
7 Number of current screen page and total number of pages
(example: '1 OF 9' ® screen page 1 of 9).
ç 1 OF 9 è
Fri 12:45
MAP V2
1
2
5
6
9
8
7
3
4
Digital In 2
Ext. 8ch In
Digital In 4
Digital In 5
Digital In 3
Digital In 1