User`s manual
Table Of Contents
- Content
- Overview Connections
- Placement and connection
- Additional earth connection
- Audionet Link
- Polarisation of mains plug
- Connecting the external power supply EPS
- Audio/Video-Connections
- First Steps
- Usage front panel
- Audionet System Remote Control
- Setup
- Display
- On Screen Display (OSD)
- Progressive Scan Card
- Security advice
25
Screen page 9
1 If the MAP V2 is in stand-by mode, press key Power On to switch the unit on.
2 Use Power Toggle to switch on/off the MAP V2. This key has the same
function as the key power on the front panel. If the MAP V2 is in stand-by mode,
Power Toggle will switch on the unit. If the MAP V2 is already switched on,
Power Toggle will switch off the unit to stand-by mode.
3 If the MAP V2 is switched on, use key Power Off to switch the unit off to stand-
by mode.
4 Number of current screen page and total number of pages
(example: '9 OF 9' ® screen page 9 of 9).
5 Skips back to the previous screen page (see user's manual Harmony 785).
6 Advances to the next screen page (see user's manual Harmony 785).
Power Off
Power
Toggle
ç 9 OF 9 è
Fri 12:45
MAP V2
Power On
1
2
3
6
5
4