User`s manual

29
If the optional Progressive Scan Card is inserted, some more video inputs are available.
In this case, please refer to chapter 'Progressive Scan Card' for more detailed
information.
Note:
· This menu item is located in the menu Channel Setup, as it is a setting, that can be
selected for each input channel independently. Although the menu Video Setup
deals with global video settings, the same function Set Video Input, as described
above, is also integrated into the Video Setup menu, simply for an easier access.
· You can assign a video input to each audio input independently. To simplify this
procedure, select the desired video input for each audio input during the setup (of
channel levels, names, decoder settings etc) for this audio input.
Offset Adjust:
Use Vol- and Vol+ keys to adjust the input channel offset. You can add gain or
attenuate each input channel independently within a range of +9...-9dB in order to
compensate different output levels of sources connected to the MAP V2.
Set Listening Mode:
This menu item has the same function as the key Listening Mode on the remote
control described above.
Digital Filter:
This menu item has the same function as the key Digital Filter on the remote control
described above.
Dynamic Range:
This menu item has the same function as the key Dyn. Range of the remote control
described above.
Set Dual Mono:
Select the preferred playback mode for DVD soundtracks in Dual Mono mode with the
Vol- and Vol+ keys.
CH1+CH2: Both Dual Mono channels are reproduced
CH1 only:: Only Dual Mono channel 1 is reproduced
CH2 only: Only Dual Mono channel 2 is reproduced
Note:
· This menu is only available, if Internal Decoder is set to active.