User`s manual
Table Of Contents
- Content
- Overview Connections
- Placement and connection
- Additional earth connection
- Audionet Link
- Polarisation of mains plug
- Connecting the external power supply EPS
- Audio/Video-Connections
- First Steps
- Usage front panel
- Audionet System Remote Control
- Setup
- Display
- On Screen Display (OSD)
- Progressive Scan Card
- Security advice
30
Edit Channel Name:
While in menu Channel Setup proceed to this menu item by pressing key Ch- if
menu item Dolby PLIIx Mode is selected, or by pressing Ch+ while menu item
Set Decoder is selected.
For each input channel you can choose a name up to 14 characters in length (exception:
the name for the Monitor/Effects loop is up to 12 characters in length). A cursor (^)
marks the current character to be changed by pressing Vol- and Vol+ keys. Press
key Mute to move the cursor to the right onto the next character position. At the end
of the character string the cursor jumps back to the first position after pressing the key
Mute .
Menu Decoder Setup
Use the function of this menu to select the desired operating modes and options for
Dolby Pro Logic IIx and DTS Neo:6 decoding.
Note:
ยท This menu is only available, if the internal Decoder is active (option Internal
Decoder is set to active).
Dolby Pro Logic IIx Mode:
Dolby Pro Logic IIx expands original 2- or 5.1-channel material to 6.1- or 7.1-channel
output using a matrix technology. Depending on the original format the following
options are available:
Menu item for Multi Ch.:
Select the preferred mode for expanding 5.1-channel program material to 6.1- or 7.1-
channels using Dolby Pro Logic IIx by using the Vol- and Vol+ keys:
Movie: The Movie mode is optimal for 5.1-channel movie soundtracks or
stereo soundtracks that are Dolby Surround encoded.
Music: Not all 5.1 material may sound ideal when decoded with Dolby Pro
Logic IIx in the Movie mode. Use mode Music if the soundfield is
focused too much on the Back Surround speakers.
Dolby D EX: Dolby Digital EX creates six full-bandwidth output channels from 5.1-
channel sources. This is done using a matrix decoder that derives three
surround channels from the two in the original recording.
Menu item for 2-Channel:
Dolby Pro Logic IIx offers 4 different modes for decoding of 2-channel sources. Select
your preferred mode with the Vol- and Vol+ keys:
Movie: The Movie mode is for use with stereo TV shows and all Dolby Surround
encoded programs. The result is an enhanced soundfield directionality that
approaches the quality of discrete 5.1-channel sound.