User`s manual
Table Of Contents
- Content
- Overview Connections
- Placement and connection
- Additional earth connection
- Audionet Link
- Polarisation of mains plug
- Connecting the external power supply EPS
- Audio/Video-Connections
- First Steps
- Usage front panel
- Audionet System Remote Control
- Setup
- Display
- On Screen Display (OSD)
- Progressive Scan Card
- Security advice
32
Note:
· This menu item is only available, if the Internal Decoder is set to active
and the Dolby Pro Logic IIx Mode Music is selected.
Panorama:
This control extends the front stereo image to include the surround speakers for an
exciting 'wraparound' effect with side wall imaging. It is particularly effective for
recordings which have strong left or right channel elements in the mix, as these are
detected and accentuated by the Panorama process. The Panorama control is
automatically turned off in Movie mode.
Note:
· This menu item is only available, if the Internal Decoder is set to active
and the Dolby Pro Logic IIx Mode Music is selected.
Set Neo:6 Mode (OSD: DTS Neo:6 Mode):
DTS Neo:6 generates a 6-channel soundfield from an original 2-channel source using a
matrix technology. Two user selectable modes are available:
Cinema: The Cinema mode is suitable for matrix encoded stereo source material
(like movie or TV soundtracks).
Music: Use the Neo:6 mode Music for stereo music material, that did not use any
surround matrix encoding technologies during recording. Neo:6 produces a
soundfield with up to 6 channels, that does not diminish the subtleties and
integrity of the original stereo recording.
Set Neo:6 Option Cgain (OSD: 4CntrGain):
If the DTS Neo:6 mode Music is selected, the user can influence and adjust the
soundfield to his listening preferences by using the option Cgain. Cgain changes the
amount of Center signals mixed to the Left and Right channels. The Center channel
level is not influenced by setting Cgain.
The user can adjust Cgain from 0.0 to 0.5 in steps of 0.1. If Cgain = 0.0, the Left
and Right channels are played back unchanged referring to the original stereo mix. The
higher the value of Cgain, the more dominant is the sound of the Center channel.
Menu item 2-Ch PCM Input uses:
Use keys Vol- and Vol+ to select the desired matrix decoder technology to expand
stereo PCM signals to 6 or 7 channels:
Dolby PLIIx: Select this option to use Dolby Pro Logic IIx. The options selected by
function Dolby PL IIx Mode for 2-Ch are used (see above).
DTS Neo:6: Select this option to use DTS Neo:6. The settings from function DTS
Neo:6 Mode are applied (see above).