User`s manual

37
Menu Delay Manager
Use this menu to enter the distances from your speakers to your listening position (Set
Distance). The distance ranges from 0 to 1500 cm in steps of 5cm. Alternatively, you
can enter the distance in Inches (Set Distance Unit). According to the entered
distances, the MAP V2 calculates the necessary delays of each channel to ensure, that
all signals from all speakers arrive at the same time at the listening position.
Use keys Vol- and Vol+ to enter the distance, select channel to be setup with keys
Ch+ / Ch- . The order of channels is the same as in the Level Setup menu.
Subw. Offset:
This option 'virtually' moves the subwoofer relative to the listening position (= adjusting
the 'phase' of the subwoofer). Use positive values, if you want to delay the signal from
the subwoofer relative to all other channels. Use negative values, if the signal from the
subwoofer should arrive earlier than the signals from all other speakers.
Set Distance Unit:
To choose the unit for measuring the distances of speakers, use Vol+ to select
Centimeter or Vol- to select Inches. Distances already entered into the system
are converted to the latest selected unit.