User`s manual

42
Progressive Scan Card
The optional Progressive Scan Card is recognized by the MAP V2 automatically and
needs no special system setup. The configuration of the Progressive Scan Card refers
only to simple adjustments to meet the needs of the video display (video
beamer/projector, plasma TV etc) connected to the MAP V2. The Progressive Scan
Card offers several video inputs that are selectable as easy as the Cinch (Composite)
and S-Video inputs using the Set Video Input function in the Channel Setup or
Video Setup menu. Please find a detailed description in the following.
Using video inputs with installed Progressive Scan Card:
You can connect and use the Video- 3 and S-Video inputs 4 of the MAP V2 with a
Progressive Scan Card installed in the same way as without the card. The video signal
of the currently activated video input is fed to and processed by the Progressive Scan
Card internally.
If the Progressive Scan Card is installed, additional video inputs are available. You
select these inputs as usual using function Set Video Input. You get to this
function by entering either the Channel Setup or the Video Setup menu. If you are on
screen page 6 in the device menu MAP V2 of the remote control, press the following
keys to get to the function Set Video Input:
Video Setup à Ch-
Or: Channel Setup à Ch-
Now use keys Vol- and Vol+ to select the desired video input for the currently
active audio input.
Note:
· To each audio input the user can assign a video input separately. The easiest way to
achieve this, is to assign the video input while you setup the individual settings (like
level adjustments, name assignment, decoder settings etc) for each audio input (see
chapter 'Setup', section 'Menu Channel Setup').
Please consult the user's manual of your video source (DVD player, LD player, VCR
etc), which video format is available at its video outputs and choose a compatible video
input of the MAP V2. The following video inputs are selectable for each audio input
individually, if the Progressive Scan Card is installed:
No Video Input No video input selected.
Video In1 to In4 The corresponding (composite) video input IN1 to IN4 3 is selected.
S-Video In 1 to In4 The corresponding S-Video input S-VIDEO1 to S-VIDEO4 4 is
selected.
YUV Video In Video input 2 is configured for YUV video signals (see
connection diagram below).
RGB Video In Video input 2 is configured for RGB video signals. The Sync signals
are connected separately (see connection diagram below).
RGB+sog Video In Video input 2 is configured for RGB video signals. The Sync
signals are provided on the Green signal line: sog = Sync On
Green (see connection diagram below).