User`s manual
Table Of Contents
- Content
- Overview Connections
- Placement and connection
- Additional earth connection
- Audionet Link
- Polarisation of mains plug
- Connecting the external power supply EPS
- Audio/Video-Connections
- First Steps
- Usage front panel
- Audionet System Remote Control
- Setup
- Display
- On Screen Display (OSD)
- Progressive Scan Card
- Security advice
47
This unit must be earthed.
Audionet EPS only.
monitor
N
E
G.
left
ANALOG OUTPUTS
VIDEO OUTVIDEO IN
IN 3 IN 4 IN 2
IN 1
S-VIDEO 1 S-VIDEO 4
S-VIDEO 3S-VIDEO 2 S-VIDEO 1
S-VIDEO 2
OUT 1
OUT 2
VGA
Y/R
/G
/B
C
C
R
B
DIGITAL
OUT
(OSD)
(Vsync)
(Hsync)
IN
IN
IN
OUT OUT
OUT
OUT
OPTICAL
Connection diagram RGB video output H/V-Sync:
If your video display has a video input for progressive RGB video signals with separate
H-Sync/V-Sync signals, connect the MAP V2 according to the following diagram:
Note:
ยท Please make sure, that for this video output mode the function Set Video Out is
set to option H/V-Sync to provide separate Sync signals on video outputs OUT1
and OUT2 7 (see above 'Video outputs Progressive Scan Card').
VGA
RGB + C
-
Sync
R G B V-Sync H-Sync
to video input of video display (5x Cinch)
alternative connection to video input
of video display (VGA)
Pinning: Pin #1 = R
Pin #2 = G
Pin #3 = B
Pin #13 = H-Sync
Pin #14 = V-Sync