User`s manual
Table Of Contents
- Content
- Overview Connections
- Placement and connection
- Additional earth connection
- Audionet Link
- Polarisation of mains plug
- Connecting the external power supply EPS
- Audio/Video-Connections
- First Steps
- Usage front panel
- Audionet System Remote Control
- Setup
- Display
- On Screen Display (OSD)
- Progressive Scan Card
- Security advice
48
This unit must be earthed.
Audionet EPS only.
N
E
G.
left
ANALOG OUTPUTS
VIDEO OUTVIDEO IN
IN 3 IN 4 IN 2
IN 1
S-VIDEO 1 S-VIDEO 4
S-VIDEO 3S-VIDEO 2 S-VIDEO 1
S-VIDEO 2
OUT 1
OUT 2
VGA
Y/R
/G
/B
C
C
R
B
DIGITAL
OUT
(OSD)
(Vsync)
(Hsync)
IN
IN
IN
OUT OUT
OUT
OUT
OPTICAL
Connection diagram RGB video output with Sync on Green:
If your video display supports only RGB video signals with Sync signals on the Green
line (Sync on Green), connect the MAP V2 according to the following diagram:
R G B to video input of video display (3x Cinch)
+Sync
alternative connection to video input of
video display (VGA)
Pinning: Pin #1 = R
Pin #2 = G + Sync
Pin #3 = B
Note:
ยท This video format uses only three lines to connect the MAP V2 to the video display
as the Sync signals are transmitted on the same line as the Green signal (Sync on
Green).
VGA
RGB+Sync on Green