User`s manual
Table Of Contents
- Content
- Overview Connections
- Placement and connection
- Additional earth connection
- Audionet Link
- Polarisation of mains plug
- Connecting the external power supply EPS
- Audio/Video-Connections
- First Steps
- Usage front panel
- Audionet System Remote Control
- Setup
- Display
- On Screen Display (OSD)
- Progressive Scan Card
- Security advice
49
Important:
ยท For this video output mode it is necessary to set the jumper on the Progressive Scan
PCB to position SyncOnGreen (see diagram below). For all other modes, the jumper
has to be in position Syncless Component (default setting).
Jumper positions:
Pin #1 and #2 connected =
Syncless Component
Pin #2 and #3 connected =
Sync on Green
Sync on Green
Syncless Comp
o
nent
1
2
3