Operation Manual

Page 13

Djinn Pro - Multimedia platform for mixing and playback

6. Cross Fader

Lock =To lock the crossfader in the middle of two channel.

Unlock=The crossfader is back to normal status.

7. Cross Fader Reverse

ON =Reverse the crossfader

OFF =Normal mode

8. Display Time – 0.5 ~ 12.0 sec. (line name start/stop time adjustment)

Scroll Speed – 50 ~ 2000 msec. (line name move time adjustment)

A. Sensitivity – Touch Wheel Sensitivity Adjustment (Adjustment range is -20~+20).

B. PITCH BEND – SPEED=1 ~ 50. The pitch bend parameter determines the impact of the jog wheel on the

pitch bend function. The player comes with the pitch bend parameter set to 25. You can adjust the parameter

between 01 (very little impact) to 50 (extreme impact) to adapt the pitch bend function perfectly to your

personal taste.

C. Intensity – VFD Brightness (Brightness range is 1~4)

D. A.Cue Level – Change the AUTO CUE level (Level range is -36~-78dB)

E. Bite Rate –Display ON/OFF.

F. Version – CXX (Control version) DSPXX (DSP version)

G. Load Defaults – Press track knob to enter load defaults.

H. Exit & Save – Exit & Save setting to next power on (Press the TRACK KNOB to exit & save in any operating

mode

Note:

Save: U1/U2, PITCH ON/OFF, PITCH RANGE, SGL/CTN, AUTO CUE, TIME MODE, HOLD, KEY LOCK,

EFFECTS ON/OFF, PLAYLIST, REPEAT MODE, MIDI CHANNEL, MIDI SETUP, CROSSFADER,

CROSSFADER REVERSE, DISPLAY TIME, SCROLL S PEED, SENITIVITY, INTENSITY, A.CUE LEVEL,

DISPLAY

Defaults: U1/U2(U1), PITCH (OFF), PITCH RANGE (10%), SGL/CTN(CTN), AUTO CUE(ON), TIME MODE

(REMAIN), HOLD(OFF), KEY LOCK(OFF), EFFECTS(OFF), PLAYLIST (NORMAL), REPEAT MODE(ALL),

MIDI CHANNEL(1-2-3), MIDI SETUP(TAP=HOLD, I/O=HIDE), CROSSFADER(UNLOCK), CROSSFADER

REVERSE(Off), DISPLAY TIME(3sec), SCROLL SPEED(400ms), SENITIVITY(0), INTENSITY(4), A.CUE

LEVEL(-48dB),Bit rate display(ON)