High-torque Professinal turntable system OPERATING INSTRUCTION 6259 - Version 3.
English TT-2930 - High-torque Professinal turntable system 1 - Safety Instructions Important Safety Information This unit was created to operate in place heated and insulated from any form of moisture or water spray. Any use in wet locations, unprotected, or subjected to temperature changes represent a significant low risk to both the device for anyone nearby. This device contains within its housing, uninsulated portions under tension high enough to pose a risk of electric shock.
TT-2930 - High-torque Professinal turntable system English Instructions and recommendations 1 - Read the instructions : It is advisable to read all instructions and operating instructions before using the device. 2 - Retain instructions : It is advisable to keep the instructions for use and operation later. 3 - Consider the warnings : It is advisable to carefully consider all warnings and instructions for operating the product.
English TT-2930 - High-torque Professinal turntable system 2 - Specifications TURNTABLE SECTION • 3-speed full manual • Motor : 8 pole, 3 phases • Driving : Direct • Platter : 332 mm dia. aluminium • Speed : 33, 45 and 78 rpm • Wow and Flutter : Less than 0.2% WRMS with 33 rpm • S/N ratio : More than 50dB (DIN-B) • Pitch : +/-10%, +/-20% TONEARM SECTION • Type : S-shaped tonearm with detachable headshell • Effective arm lenght : 230.5 mm • Applicable cartridge weight : 3.5~8.
TT-2930 - High-torque Professinal turntable system English 4 - Device overview 1 - Power Dial On - Rotate Right Off - Rotate Left 2 - Start/Stop Press this button to start or stop the platter. 3 - Platter revolution speeds 33 rpm – Press 33 45 rpm – Press 45 78 rpm – Press 33 and 45 buttons simultaneously. To return to 33 or 45-rpm play mode, just press the desired button. 4 - Platter Place this on the center spindle.
Français TT-2930 - Platine disques high-torque direct avec cellule 24 23 22 21 20 19 18 22 - Anti-Skate Control Applies a small inward force to the tonearm, counteracting the tendency of the tonearm to move outward due to forces created by the stylus in the record groove. 23 - Tonearm assembly height lock Locks the tonearm height setting attempting to make a height adjustment. 24 - Counterweight Balances the tone arm and provides adjustment for proper downward tracking force on the stylus.
TT-2930 - High-torque Professinal turntable system English 5 - Assembly 1 - Remove the main unit with the packing from the box and take off the packing. 2 - Set the 45rpm adaptor on the main unit. 3 - Insert the turntable platter onto the centre spindle. 4 - Set the slip mat on the platter. 5 - Installation of cartridge: When installing a cartridge, refer to the operating instructions of that cartridge. During installation, attach the stylus protector to guard the stylus tip from damage.
Because AUDIOPHONY® takes the utmost care in its products to make sure you only get the best possible quality, our products are subjects to modifications without prior notice. That is why technical specifications and the products physical configuration might differ from the illustrations. Make sure you get the latest news and updates about the AUDIOPHONY® products on www.audiophony.com AUDIOPHONY® is a trademark of HITMUSIC S.A.
