User`s manual

2
DJAP-612PB DJAP-615P
Safety Related Symbols
This symbol, wherever used, alerts you to the
presence of uninsulated and dangerous voltages within
the product enclosure. These are voltages that may be
sufficient to constitute the risk of electric shock or
death.
This symbol, wherever used, alerts you to important
operating and maintenance instructions.
Please read.
Protective Ground Terminal
AC mains (Alternating Current)
AC mains (Alternating Current)
Denotes the product is turned on.
Denotes the product is turned off.
WARNING
Describes precautions that should be observed to
prevent the possibility of death or injury to the user.
CAUTION
Describes precautions that should be observed to
prevent damage to the product.Disposing of this
product should not be placed in municipal waste but
rather in a separate collection.
WARNING Power Supply
Ensure that them a inssource voltage (AC outlet)
matches the voltage rating of the product. Failure
to do so could result in damage to the product and
possibly the user. Unplug the product before electrical
storms occur and when unused for long periods of
time to reduce the risk of electric shock or fire.
External Connection
Always use proper ready-made insulated mains cabling
(power cord). Failure to do so could result in shock/
death or fire. If in doubt, seek advice from a registered
electrician.
Do Not Remove Any Covers
Within the product are areas where high voltages may
present. To reduce the risk of electric shock do not
remove any covers unless the AC mains power cord
is removed. Covers should be removed by qualified
service personnel only.
No user serviceable parts inside.
Fuse
To prevent fire and damage to the product, use only
the recommended fuse type as indicated in this
manual. Do not short-circuit the fuse holder. Before
replacing the fuse, make sure that the product is OFF
and disconnected from the AC outlet.
Protective Ground
Before turning the unit ON, make sure that it is
connected to Ground. This is to prevent the risk of
electric shock.Never cut internal or external Ground
wires. Like wise, never remove Ground wiring from the
Protective Ground Terminal.
Operating Conditions
Always install in accordance with the manufacturer
'sinstructions.To avoid the risk of electric shock and
damage, do notsubject this product to any liquid/rain
or moisture.Do not use this product when in close
proximity to water.Do not install this product near any
direct heat source.Do not block areas of ventilation.
Failure to do so could result in fire.Keep product away
from naked flames.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructionsFollow all instructions Keep
these instructions. Do not discard.Heed all warnings.
Only use attachments / accessories specified by
themanufacturer.
Power Cord and Plug
Do not tamper with the power cord or plug. These
redesigned for your safety.Do not remove Ground
connections! If the plug does not fit your AC out let
seek advicefrom a qualified electrician.Protect the
power cord and plug from any physical stress to avoid
risk of electric shock.Do not place heavy objects on
the power cord. This could cause electric shock or
fire.
Cleaning
When required, either blow off dust from the productor
use a dry cloth.Do not use any solvents such as
Benzol or Alcohol.For safety, keep product clean and
free from dust.
Servicing
Refer all servicing to qualified service personnel
only. Do not perform any servicing other than those
instructions contained within the User's Manual.
PORTABLECarts and stands - The component should
be used
CART WARNING
only with a cart or stand that is recommended by the
manufacturer. A component and cart combination
should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the component
and cart combination to overturn.