TS-FA80 TS-FA100 TS-FA120 All Audiopipe products are designed, manufactured and tested to perform in harsh environments. From our entry level products to our high end series, Audiopipe is your best choice for competition level performance. We welcome you to Team Audiopipe. For more information, please visit your authorized Audiopipe dealer or: WWW.AUDIOPIPE.
Warranty 1 2 3 Building an Enclosure 4 5 6-7
Audiopipe Limited warranty Audiopipe warrants this Subwoofer to be free of defects in material and workmanship for period of 1 year from the original purchase date with original receipt. Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Audiopipe’s discretion. Warranty replacements may have some cosmetic scratches and blemishes.
Nominal Diameter Overall Diameter(A) Mounting Hole Diameter(B) Bolt Hole Circle(C) Magnet Diameter(D) Mounting Depth(E) Driver Displacement Net Weight TS-FA80 TS-FA100 TS-FA120 Ø203mm 8” Ø221mm 8 11/16” Ø183mm 7 13/64” Ø198mm 7 25/32” Ø126mm 4 31/32” 65mm 2 9/16” 3.40 L 0.12 cu ft 2.9kg 6.39 lb Ø254mm 10” Ø275mm 10 13/16” Ø234mm 9 7/32” Ø254mm 10” Ø140mm 5 1/2” 71mm 2 51/64” 4.25 L 0.15 cu ft 3.6kg 7.94 lb Ø300mm 12” Ø328mm 12 29/32” Ø283mm 11 9/64” Ø302mm 11 7/8” Ø156mm 6 5/32” 73mm 2 7/8” 4.53 L 0.
Features • 4-Layer Dual Voice Coil BASV • Piano Black Aluminum Basket • Piano Black IMPP Cone Fs (Hz) Re (Ohms) Le (mH) Qts Qes Qms Cms (m/N) Vas (L) Mms (g) Mmd (g) No (%) SPL (dB-1W/1M) BL (T*M) Sd (cm2) Krm (mOhms) Erm Kxm (mH) Exm Frequency Response (Hz) Voice Coil Diameter Voice Coil Height Voice Coil Layers Magnetic Gap Height Linera Excursion, pk-pk(Xmax) Maximum Excursion, pk-pk Magnet Weight Woofer Displacement Net Weight Power Rating TS-FA80 80 2x3.6 TS-FA100 60 2x3.6 TS-FA120 50 2x3.6 1.
Building an enclosure When building an enclosure, the walls should be as rigid as possible and not flex. Flexing of the enclosure can drastically decrease your subwoofers performance. It is recommended that Enclosures be built using 3/4” MDF, be glued and secured with nails or screws. Add bracing to each of the larger unsupported panels. Your enclosures construction has a significant bearing on how well your subwoofers perform.
The TS-FA series of subwoofers are available with dual 4 Ohms voice coils. Both coils must be connected to a source of amplification. A dual 4 Ohms woofer can be configured in parallel to provide a 1 Ohm load. A dual 4 Ohms woofer can be also configured in series to provide a 8 Ohms load. The terminal with the red markings is the positive while the black terminals represent the negative.
Sealed enclosure This type of enclosure is classic and the simplest to build among most installers. The box volume will directly impact the performance of the subwoofer, it is important to make sure the enclosure is properly sealed. Use some type of sealant on the seams as this will ensure a solid construction and prevent air leaks. Larger enclosures will provide a flatter response and deeper bass where as a smaller box will provide a generally higher output for greater SPL.
Recommended Sealed Enclosure TS-FA80 0.6 cu ft. TS-FA100 0.7 cu ft. TS-FA120 0.8 cu ft.
www.audiopipe.
