Installation manual

APPENDIX B:
B-1
B
APPENDIX B
Frequently
Asked Questions
Frequently Asked Questions
1. Why should I install Leviton’s Integrated Networks
rather than assembling my own from off-the-shelf
components?
Leviton offers a single, convenient package of tested
materials that meet commercial grade requirements.
They are designed to work together without conflicts.
They are also, in part, simple plug and play architecture
that makes the installer’s job easier. The most popular
structured cable functions are brought together in our
Pre-Configured Structured Cabling Panels that conve-
niently meet most system requirements. Panels and
components can easily be combined to build even larg-
er systems. Leviton offers easy to use, compatible com-
ponents, and a certified training program for installers,
which many of your clients will find reassuring.
2. Why should I bother becoming a certified installer
and get my Leviton Integrated Networks Certified
System certificate?
The certification program will help you install the
Leviton Integrated Network platforms and application
subsystems according to best practices and will
enable the homeowner to receive years of problem free
service from the completed installation. Your certificate
is proof that you have completed training and have
demonstrated satisfactory understanding of the
ANSI/TIA/EIA-570A Residential Structured Wiring
Standard and Leviton installation, documentation, test-
ing, and registration practices. Use your certificate to
indicate to your builder customer that you are a certi-
fied installer.
A summary of the advantages are:
• The Certification Program provides a structure in
which the individual and otherwise standalone pieces
of a structured cabling system are combined seam-
lessly for the end user.
• The Program benefits the end user with a quality
installation and quality support.
• The program benefits the installation company by
providing access to high quality products and system
certification, as well as factory training and technical
support, to offer to its customers.
• Many builders will require the certificate.
• Applications Assurance and TEN YEAR Extended
Warranty.
• Training in industry standards and installation prac-
tices.
• Access to the latest standards developments infor-
mation.
• Technical support from Leviton applications engi-
neers and RCDD’s.
• Joint Leviton promotional materials and opportunities.
• Ability to bid jobs requiring certified installers.
• Promotion of the certification program and Program
Partners to end users and designers.
• Lead referrals
3. I’ve always used electrical boxes. Why do you rec-
ommend mud rings for cable termination and device
installation?
A mud ring gives the installer easy and ready access to
the stud cavity and allows for a long service loop to be
left in the wall without damaging the cable. Remember,
low-voltage cable has to be handled more carefully
than AC cable. Cable pinching can occur with a box,.
Stuffing the cable in a box is not recommended since
cable kinks can occur which impact the cable per-
formance.
4. Why can’t I push my Category 5 or 5e cable into a
jack or distribution module with my screwdriver and
clip the ends off with a wire cutter?
Category 5 or 5e’s twisted pairs are made from a small
gauge wire (usually 24). It can easily be damaged with
the wrong tools and the system that depends on the
Category 5 or 5e might not operate properly. The prop-
er tool to use is a punchdown/termination tool .
For more information call your Leviton representative or the Leviton Technical Hotlinet at 800-722-2082
© Copyright 2001` Leviton Manufacturing Co., Inc.