Installation manual
• Data collision and jabber handling functions
• 10 Mps performance speed
• Five Category 5 or 5e RJ-45 ports, including one
port for expansion
• IEEE 802.3 compliant
• LED lights to indicatePower, Link/Receive, Partition
Power, and Collision status
• Up to fourteen network connections by uplinking a
maximum or four hubs with a NORMAL/UPLINK
switch
• Auto partitioning and reconnecting of ports to facili-
tate faulty segment isolation
The 10Base-T Network Hub is packaged with a Power
Adapter. Please note that the power required is 7.5
Vdc. This hub is an excellent choice for most residen-
tial needs such as sharing printers and other peripher-
als as well as networking PCs for file sharing and multi-
player games.
6.6.2. 10/100Base-T Network Hub
This hub shares
the same prop-
erties as the 10-
Base-T Network
Hub, but with its
faster speed of
100Mbps, the
10/100Base-T
Network Hub
can meet the
more demanding needs of a home office and telecom-
muting applications. Some of these applications
include sharing high-speed and capacity devices such
as zip drive and back-up systems. The hub will auto-
matically adapt to either a 10Base-T or 100BaseT
attached device. Note that a 10/100Base-T hub will
operate only as fast as the slowest device attached.
6.7 Multi-Room Stereo Sound
Application
New homes are becoming increasingly pre-wired for
audio. Once again, a single, central distribution point is
the best solution for most installations. The Leviton
Multi-Room Stereo Sound application can accommo-
date up to six pairs of speakers when wired correctly.
The impedance matching analog volume control
adjusts the volume of individual zones in the home. Two
sets of eight-inch in-wall speakers and two analog vol-
ume controls are included in the system package. One
indoor and one outdoor wallplate configured with bind-
ing posts for customer stereo speaker terminations are
also included.
This application features:
• Easy hookup to the audio distribution module in the
SMC for multiple speakers
• Volume controls fit in single-gang box or mud ring
6.7.1 Audio Controls
Leviton offers three series of audio controls in its
Composer Series. Each is appropriate for a specific
power installation range.
The Brahms Stereo Volume Control is a 75 watt (25
watts of RMS) control that is ideal for low to moderate
power installations including those with dedicated
multi-room amplifiers and mini-systems. The Brahms
series can accommodate 4, 8, or 16 Ohm speakers
and amplifiers up to 75 watts. This series features:
• Attenuation: -34 dB in 12 steps
• Attenuator type: tapped auto transfer
• Power rating: UL Listed @75 watts audio, 25 watts
RMS continuous
• Screw type connections and a 12-position rotary
switch
•Rotary controls built tapped auto-transformer design
Brahms offers individual controls whose range of fea-
tures include dual volume capability, a headphone
jack, and even an outdoor model.
Leviton’s Strauss‘ Volume Controls have similar fea-
tures to the Brahms controls, but come with a higher
power rating of 216 watts. This makes them ideal for
home theatre receivers and built-in impedance match-
ing separate power amplifiers. With their higher current
capabilities, the Strauss series is built to resist satura-
tion and degradation even after years of high-volume
use all the while maintaining signal purity.
The Decora Digital Chopin Volume Control interface
replaces traditional transformers and rotary controls
with an advanced interface module and one-touch
For more information call your Leviton representative or the Leviton Technical Hotline at 800-722-2082
6-8
© Copyright 2001 Leviton Manufacturing Co., Inc.
Installation Manual
6
DESCRIPTION
of Leviton
Integrated
Systems
10/100Base-T Network Hub
1 X 6 Passive Audio Module