Instruction manual

6
3. To turn power to the apparatus off, unplug the power supply cable from the wall
outlet.
4. To protect the unit during violent thunderstorms, unplug the power supply cable
from the wall outlet.
GENERAL OPERATION
GENERAL OPERATION
1. Select the source by setting the FUNCTION SELECTOR to CD/MP3/USB, OFF or
FM ST.
2. Set the desired volume level using the VOLUME KNOB.
3. To turn off the unit, set the FUNCTION SELECTOR to OFF.
RADIO
• To listen to the FM radio, extend the telescopic antenna and orient it for optimum
reception. Reduce the length of the antenna if the signal is too strong (if you are
very near the transmitter, for example).
RADIO RECEPTION
1. Set the FUNCTION SELECTOR to FM ST.
2. Turn the TUNING CONTROL to search for the desired station.
NOTE: The FM stereo indicator comes on if the FREQUENCY BAND SELECTOR is set
on FM stereo and you have tuned the radio to an FM stereo station.
3. Adjust VOLUME CONTROL for the desired volume level.
4. When you have finished listening to the radio, position the FUNCTION SELECTOR
to OFF to turn the unit off.
STEREO HEADPHONE JACK
• Plug stereo headphones (not included), equipped with a 3.5mm mini-plug, into
the PHONES jack (on top of the unit, left-hand side) for private listening, without
disturbing those around you.
• Reduce the VOLUME to a low level before putting on the headphones. You can
then adjust the VOLUME progressively to a comfortable level.
CD/MP3/USB PLAYER OPERATION
CD/MP3 FILE PLAYBA CK
The CD player supports audio discs, CD-R, CD-RW, MP3 and USB files. Do not attempt
to read CD-ROM, CDi, VCDs, DVDs or data CDs.
Note: Even if this portable radio-CD player is able to read CD-R and CD-RW discs, in
addition to conventional compact discs, it is not possible to offer a 100% guarantee
that all CD-R/RW discs can be read, playback depends on the quality and condition
of the blank discs that you use, among other things. A play back failure does not
necessarily indicate that the unit is malfunctioning.
1. Position the FUNCTION SELECTOR on CD/MP3/USB (the display unit briefly
displays - - -).
2. To open the CD player door, raise it by the corner marked OPEN/CLOSE.
3. Insert a CD, CD-R, CD-RW or MP3 disc, printed surface facing upwards and gently
press the CD player door to close it.
4. Start playback by pressing PLAY/PAUSE.
• Press PLAY/PA USE for 2 seconds to switch from CD/MP3 to USB mode. Press PLAY/
PAUSE again for 2seconds to return to CD/MP3 mode.
5. Press PLAY/PA USE to interrupt or resume playback.
6. To stop CD playback, press STOP.
NOTE: CD playback stops automatically when:
• the CD compartment is opened;
• the radio function is selected;
• the CD/MP3/USB is finished.
SELECTING A DIFFERENT TRACK
During playback, press NEXT or BACK on the unit or remote control unit to select a track.
• If you have selected a track number in Stop or Pause mode, press PLAY/PAUSE to
resume playback.
• Briefly press NEXT to pass to the next track or press NEXT several times until the
desired track number appears in the display.
• Briefly press BACK to return tot he start of the current track.
• Press BA CK several times to find a previous track.
Instruction Manual