Operation Manual

GB-2
Wake to music
Press and hold the ALARM button (12). Press the HOUR button (13) or MINUTE button (4) to set the
desired wake up time. Release the ALARM button (12) to show the current time. Slide the ON / OFF /
AUTO button (7) to “AUTO” and turn on the volume. The radio will play automatically at the time set.
Wake to buzzer alarm
Follow the steps of "wake to music" and turn the VOLUME / BUZZ knob to the “OFF” position. You
will be awakened by the BUZZER alarm. If you want to stop the alarm, switch ON / OFF / AUTO
button (7) to "OFF".
Sleep to music
Slide the ON / OFF / AUTO button (7) to either “OFF" or "AUTO". Press the SLEEP button (14) once.
During ‘sleep time’ the radio can accompany you to sleep for a maximum of 1 hour and 59 minutes.
To set the desired period of sleep, simply press and hold the SLEEP button (14) and then press
MINUTE button (4) to set the desired period of the sleep function. Press the SLEEP button (14) and
the HOUR button (13) simultaneously for one hour and 59 minutes sleep time. If you want to turn off
the radio before sleep time has expired, press the SNOOZE button (3) once.
Snooze operation
When the alarm is on, press the SNOOZE button (3) once. After 9 minutes, the alarm will be on again.
To go to sleep and wake to music
Repeat the steps of "wake to music". Press the SLEEP button (14) to set the desired playing time. The
radio will stop automatically and will start again at the preset wake up time.
Projector operation
Press the PROJECTION button (15) once to turn on the PROJECTOR (16). The time will be projected on
the ceiling in dark condition. Adjust the FOCUS knob (17) to adjust the focus of projected date or
time. You can rotate the PROJECTION RING (20) up to 90 degree angle for angle adjustment. Press
the SET button (2) once to project the date, press the SET button (2) twice to project the SECONDS.
Press the SET button (2) once again to return to the projection of time. At normal time display, press
the MODE button (1) once, the projector will project time and date. Then press the MODE button (1)
and the SET button (2) respectively to set the correct project time. Press the MODE button (1) four
times, it will show “0:00”, then you may set the time for 24 hours. If you want to set the time for 12
hours display, then keep on pressing the SET button (2) until you see the display show “12:A” then
you can set the time for 12 hour display. Press the MODE button (1) to switch between date and
time. Then press the SET button (2) to change date or time. Press the PROJECTION button (15) again
to turn off the PROJECTOR (16).