Operation Manual

907-A006
RADIO OPERATION
- Press the On/Off button (9) to turn radio On.
- Select MW or FM band using the Wave band switch (15).
- Select the station using the tuning control (16)
- Turn the volume control (14) to adjust volume as required.
- Press the On/Off button (9) to turn radio Off.
Note :
- The MW band use an internal directional aerial. Rotate the radio for best
reception.
- Ensure that the FM cord antenna (20) is completely unrolled and
extended for best FM reception.
RESET
- The reset bottom (17) is located on the back of unit. Use a ballpoint pen
to press it whenever you change the batteries, or unit is not performing
as expected. This will return all settings to default value, and you will
lose any stored data (alarm and clock settings).
PROJECTOR
- This unit has a built-in projector for clock.
- Set projection On/Off slide switch (24) to On position to turn time
projection On.
- Focus setting : To adjust the projection clock brightness by turning the
focus (6) until the projected time is clearly shown on the ceiling or wall.
NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A
DARKENED ROOM.
MAXIMUM PROJECTION DISTANCE IS 3-9 FEET..
GB-11