Operation Manual

Mute
1. Press the MUTE button to mute the sound temporarily.
A Mute icon appears on the screen.
2. Press the MUTE button again to restore the sound.
The Mute icon disappears.
Note
When you turn the LED-TV off, the mute function is canceled automatically.
Select the TV channel you want
You can use the number keys on the remote control to directly select TV channels.
The LED-TV can store up to 99 channels (1 to 99), and you can press the keys on
the remote control or on the panel to make a selection.
1- Press the relevant key on the remote control if you want to
choose any channel from 1 to 9. (For example: if you want
to choose channel 8, just press the key number 8).
2- If you want to choose a channel bigger than 9, please press
the “-/--” button until “- -” is indicated on the screen. Enter
the two digits of the channel number you want to watch.
(For example: select channel 16).
ASPECT
Press to display proportion.(AUTO；FULL；ZOOM；4：3；16：9).
NICAM
Usually set to stereo to provide the best reproduction, but if reception deteriorates or
if the service is not available the switch to Mono. Mono(M1) and (M2) can also be selected
if a mono signal is being transmitted.
E 10