Specification Sheet

Specifications

 Stereo (8 ohm): 50W per channel, <0.2% THD+N

 Stereo (4 ohm): 60W per channel, <0.2% THD+N

 Bridged Mono (8 ohm): 150W, 1kHz, <1% THD+N

 Frequency Response: 10Hz ~ 30kHz, +0dB/ -2dB

 Signal to Noise Ratio: 100dB below 50W output into 8 ohms

 Channel Separation: 70dB @ 1kHz, referred to 50W output into 8 ohms

 Input Sensitivity: 700mV input for rated 50W output into 8 ohms

 Bass/Treble Control: +/- 12dB @ 100Hz and 10kHz

 AC Power Consumption: 500W maximum

 Net Weight: 9.6lbs / 4.4kgs

 Gross Weight: 11lbs / 5kgs

 Height: 2.9″ (including feet)

 Width: 16.5″

 Depth: 9.5″

PAGE 1
Specifications               Stereo (8 ohm): 50W per channel, <0.2% THD+N Stereo (4 ohm): 60W per channel, <0.2% THD+N Bridged Mono (8 ohm): 150W, 1kHz, <1% THD+N Frequency Response: 10Hz ~ 30kHz, +0dB/ -2dB Signal to Noise Ratio: 100dB below 50W output into 8 ohms Channel Separation: 70dB @ 1kHz, referred to 50W output into 8 ohms Input Sensitivity: 700mV input for rated 50W output into 8 ohms Bass/Treble Control: +/- 12dB @ 100Hz and 10kHz AC Power Consumption: 500W maximum Net Weight: 9.