User Manual

14
Connectors and control units
P ONE side view with optionally available HELIX Digital Input Module HDM 1
10
Output Channel
Speaker outputs for connecting loudspeakers.
11
GND
Connector for the ground cable (negative
terminal of the battery or metal body of the
vehicle).
12
REM
Connector for the remote cable.
13
+12 V
Connector for the +12 V power cable of the
positive terminal of the battery.
1
Status LED
This LED indicates the operating mode of the
amplier.
2
Line Input
RCA inputs for connecting lowlevel line
signals.
3
Clipping LED
This LED lights up red if one of the inputs is
overdriven.
4
Gain
Control for adjusting the input sensitivity of
the lowlevel Line Inputs and the optional op-
tical input.
5
Input Mode
Switch to adapt the amplier to the number of
used input channels.
6
TwinPower Link switch
Switch for operating two P ONE ampliers in
bridge mode.
7
TwinPower signal link
Signal in- and output for bridge mode opera-
tion in TwinPower Link mode.
8
SPDIF Direct In switch (optional)
Switch for routing the digital input signal
directly to the ampliers internal power stage.
9
Optical Input (optional)
Optical input for digital stereo signals ( SPDIF
format).
10
1311 12
1
3 5 6 72
4
8
optional
9