Owner's Manual

2. Change to the “Virtual to Output Routing” matrix and route the “Virtual E – Front Center Full” channel to

the desired output channels (as described in workow step 2) to which the center processing shall be

applied.

3. Now switch to the FX menu and activate the desired sound e󰀨ect in the “Center Processing” tab by

setting the appropriate check mark. Sounde󰀨ekt durch Setzen eines Hakens.

Notes for front processing with its StageXpander and ClarityXpander features

The StageXpander and Front ClarityXpander settings always a󰀨ect the virtual channels “Front L Full” and

“Front R Full”.

Hints for “Augmented Bass Processing” with its “Dynamic Bass Enhancement” and “SubXpander”

function

For Augmented Bass Processing certain settings have to be made in order to use it.

1. An input signal has to be assigned to at least one of the virtual subwoofer channels (“Subwoofer 1” or

“Subwoofer 2”) (see workow step 1).

2. Change to the “Virtual to Output Routing” matrix and route the channel (s) “Virtual I – Subwoofer 1” and /

or “Virtual J – Subwoofer 2” to the desired output channel or channels (as described in workow step 2)

to which the subwoofer signal and its Augmented Bass Processing shall be applied to.

3. Now switch to the FX menu and activate the desired sound e󰀨ect.

For information about input routing see workow step 1

For information about output routing see workow step 2

Note: the bass processing is switched on and o together for both “Subwoofer 1” and “Subwoofer 2” channels,

nevertheless the two channels still remain separately processed for stereo applications.

Conguration of the Virtual Channel Processing (VCP)