Manual

22
Installation
Fig. 1: Pin conguration of the System Connector 1 and 2
System Connector 1
1. Highlevel loudspeaker input rear left (-) / C
2. Highlevel loudspeaker input front left (-) / A
3. Highlevel loudspeaker input front right (-) / B
4. Highlevel loudspeaker input rear right (-) / D
5. Loudspeaker output rear right (-) / D
6. Loudspeaker output rear left (-) / C
7. Loudspeaker output front right (-) / B
8. Loudspeaker output front left (-) / A
9. Ground* / Warning: Do not use this pin!
10. Ground* / Warning: Do not use this pin!
11. Highlevel loudspeaker input rear left (+) / C
12. Highlevel loudspeaker input front left (+) / A
13. Highlevel loudspeaker input front right (+) / B
14. Highlevel loudspeaker input rear right (+) / D
15. Loudspeaker output rear right (+) / D
16. Loudspeaker output rear left (+) / C
17. Loudspeaker output front right (+) / B
18. Loudspeaker output front left (+) / A
19. +12 Volts* / Warning: Do not use this pin!
20. +12 Volts* / Warning: Do not use this pin!
System Connector 2
21. Not used
22. Subwoofer output 1 (-) / E
23. Subwoofer output 1 (-) / F
24. Loudspeaker output center (-) / G
25. Not used
26. Subwoofer output 1 (+) / E
27. Subwoofer output 1 (+) / F
28. Loudspeaker output center (+) / G
Fig. 2: Pin assignment Power Input plug
Plug top side
A
+12 V - for connecting the UP 7DSP to the positive
terminal of the car´s battery.
B
GND - for connecting the ground cable.
C
REM - remote input for connecting the amplier to the
remote output of the signal source.
10921 22 23 24
25 26 27 28
1 2 3 4
11 12 13 14
5 6 7 8
15 16 17 18 19 20
* Not used on the enclosed System Connector 1 connection cable.