Manual
27
The DSP PC-Tool software enables a free congu-
ration of the UP 7DSP amplier.
The user interface is designed for easy handling of
all functions and allows an individual adjustment of
each of the eight DSP channels.
Prior to connecting the amplier to your PC vis-
it our website and download the latest version
of the DSP PC-Tool software. Check from
time to time for software updates. You will nd
the software and the respective user manual on
www.audiotec-scher.com. We strongly recom-
mend to carefully read the user manual (Sound
Tuning Magazine) before using the software for the
rst time in order to avoid any complications and
failures.
Important: Make sure that the amplier is not con-
nected to your computer before the software and
USB driver are installed!
In the following the most important steps how to
connect and the rst start-up are described:
1. Download the latest version of the DSP
PC-Tool software (available on our website
www.audiotec-scher.com) and install it on
your computer.
2. Connect the amplier to your computer using
the USB cable that is included in delivery. If you
have to bridge longer distances please use an
active USB extension cable with integrated re-
peater and no passive extension.
3. Turn on the amplier and start the software after
the Status LED lights up green. The operating
software will be updated automatically to the
latest version if it is not up-to-date.
4. Now you are able to congure your MATCH
UP 7DSP with our intuitive DSP PC-Tool soft-
ware. Nevertheless, interesting and useful
hints can be found e.g. in our “Sound Tuning
Magazine”, which can be downloaded for free
from our website.
Caution: We highly recommend to set the volume
of your head unit / car radio to minimum position
during rst start-up. Additionally no devices should
be connected to the Line Out until general settings
in the DSP PC-Tool software have been made.
Especially if the UP 7DSP will be used in fully ac-
tive applications, a wrong setup can destroy your
speakers right away.
Connection to a PC