0-Inch Roof-Mount DVD Player With DVD/CD/MP3 SYSTEM AVXMTG10U OPERATION MANUAL
TABLE OF CONTENTS Important Notices ......................................................................................................................................... 2 Congratulations .............................................................................................................................................. 3 Features ...............................................................................................................................................................
IMPORTANT NOTICES An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver only if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
CONGRATULATIONS Congratulations on your purchase of the AUDIOUVOX AVXMTG10U DVD player with Drop-Down Video/Monitor. The AVXMTG10U player has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow in order to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
CONTROLS AND INDICATORS DIAGRAM Front View 1 2 3 4 5 6 7 8 9 10 11 12 1 17 16 13 14 15 1. Dome Lights - Provides additional interior illumination. 2. SOURCE (S) Button - Press this button to select one of the sources: DVD, AV IN, CARD, USB. 3. VOLUME ( + ) Button - Press this button to increase the volume or increase the level of selected picture controls. 4. PIC Button - Press this button to enter the picture adjustment mode.
1. DVD Disc insertion Slot - For loading and removing disks. Turn the unit on before loading a disc. Insert a disc with the label facing up towards the headliner. The player will load a disc when a disc is inserted. 2. DISC Indicator light - Illuminates green when a disc is inserted. 3. Three Position Dome Light Switch: ON - Turn on the dome lights. OFF - The dome Lights will not turn on in this position.
REMOTE CONTROL OPERATION Battery Installation Before attempting to operate your remote control, install the battery as described below: 1. Using your finger, press the tab (1) down in the direction of the arrow. 2. Slide the battery holder (2) out in the direction of the arrow. 3. Install one CR2025 battery. Make sure that the proper polarity (+ or -) is observed. 4. Slide the battery holder into the remote control until it locks.
Remote Control Functional Description 1 2 3 4 5 6 7 8 9 10 1. POWER ( ) Button - Press this button to turn the unit ON and OFF. 2. NUMBER Buttons - Press to enter the numbers 0 to 9 for selection of CD tracks, DVD chapters or password setting. 3. PREVIOUS/CURSOR ( ) Button - Go to the previous chapter or track. The cursor is used to select menus on the screen. 4. MENU Button - Press this button to access the DVD root menu (DVD MODE). 5. OK Button - Used to implement a selected setting or menu option. 6.
Remote Control Functional Description 20 19 18 11 12 13 14 17 16 15 11. MUTE Button - Press this button to mute the audio for wireless FMM. 12. DAY/NIGHT Button- This control toggles the unit between “ DAY” and “NIGHT” LCD illumination modes. In the “DAY” mode, the LCD backlight intensity is at maximum. In the “NIGHT” mode, the LCD backlight is dimmed to a preset level that is more suitable for low light operation. 13. FMM ON/OFF Button - Turns the wireless FM Modulator ON or OFF. 14.
30 29 28 27 26 25 24 23 22 21 Remote Control Functional Description 21. STOP ( ) Button - Press this button to stop playback. 22. SOURCE Button - Press to select the source menu (DVD/AV1/CARD/USB). 23. SCAN FORWARD/CURSOR ( ) Button - Scan forward at 2, 4, 8, 16, and 32 times speed. The cursor is used to select menus on the screen. 24. PIC Button - Press this button to enter the picture adjustment mode Press repeatedly to adjust in the following sequence: Brightness, Contrast, Color, Reset.
DVD BASICS To get the optimum use out of the DVD player, please read this section. DVD Region Code The DVD player is preset to a region code at the factory depending on where the unit is sold. DVDs are also coded by region. These region codes must match in order for the disc to play. If the region codes do not match, the disc will not play. This system is set to Region 1 (USA) and will not play discs that have a region code different from Region 1. The system will display “WRONG REGION.
Types of Discs Your System Will Play Your system will play the following types of discs: • DVD disc - DVD discs that contain video. • Audio discs - Audio CDs that contain musical or sound content only. • MP3 discs - A disc that contains audio files (for example, a CD-R with downloaded MP3 files). This unit is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software, playback can not be guaranteed for every disc.
LOADING AND PLAYING DISCS 1. 2. 3. 4. 5. 6. Press the Screen Release (PRESS) button to unlock the LCD screen. The LCD screen will drop down slightly. Pivot the screen downward until a conformable viewing angle is reached. The hinge friction will hold the screen in position while the unit is in use. Press the power ( ) button on the unit or remote control to turn the unit on. Insert a disc into the disc insertion slot with the label facing up towards the headliner.
General Setup Page Menu TV Display - - General Setup Page - TV Display Wide Angle Mark Off TV Type NTSC Screen Saver On OSD Lang ENG Last Memory On Normal/PS Normal/LB Wide This item allows you to set the screen display format. Optional Settings: Normal/PS, Normal/LB, Wide The default setting is Wide. Note: This function depends on the aspect ratio with which the DVD disc is recorded.
General Setup Page Menu (continued) OSD Language - - General Setup Page - TV Display Wide Angle Mark Off TV Type NTSC Screen Saver On OSD Lang ENG Last Memory On English French Spanish Italian This item allows you to choose an On Screen Display menu language. Optional Settings: English, Spanish, French, Italian The default setting is English.
Preference Page Menu Audio - - Preference Page - Audio ENG Subtitle OFF Disc Menu ENG Parental Default English French Spanish Italian This item allows you to select an audio language for DVD playback. The audio language depends on the information available on each disc. Optional Settings: English, Spanish, French, Italian. The default setting is English. Note: You can also change the audio language during playback by pressing the Audio button.
Preference Page Menu (continued) Default - - Preference Page - Audio ENG Subtitle OFF Disc Menu ENG Parental Default This item allows you to reset all settings to the original factory settings. Select this item and press the “OK” button. Note: This function does not reset the Parental level to the original factory setting. Reset Load Factory Setting PLAYING JPG FILES 1. 2. 3. 4. 5. Place a JPG disc into the disc insertion slot, the unit will start reading the disc and play.
PLAYING MP3 FILES MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on a DVD player. The DVD player plays the songs in the order they were burned on to the disc. When playback is started, the elapsed time of the track that is playing will be displayed. 1.
SOURCE FEATURES 1. Press the “SOURCE” button on the unit or remote control. The following menu will appear on the screen: DVD AV IN CARD USB 2. Press the “ S ” or “ T ” cursor button to choose an item. 3. Press the “OK” button. DVD Last Memory for the DVD mode: If the unit is turned off and then on, and the DVD disc is not removed, the unit will play the DVD from the point it stopped last time. At power OFF mode, the unit will turn on automatically when a disc is inserted.
Overhead Dome Lights The Dome Lights integrated into the unit are controlled by a three position slide switch. Sliding the switch to the ON position will turn the light ON. The OFF position will prevent the lights from turning ON with the vehicle interior lighting. The AUTO position will allow the lights to turn ON and OFF with the vehicle interior lighting. Refer to the installation guide for wire connections.
TROUBLESHOOTING Problem Solution IR remote is inoperative. 1. Verify that the batteries in the remote are fresh. 2. Verify that the infrared remote sensor is not obstructed. Disc will not play or wrong region is displayed. 1. Insert a disc with the label side facing up towards the headliner. 2. Check the type of the disc you put into the disc tray. This DVD only plays DVD, audio CD, JPEG, and MP3. 3. Both the unit and the disc are coded by region.
Problem Solution Picture is distorted. 1. The disc might be damaged, try another disc. 2. It is normal for some distortion to appear during forward or reverse scan.
SPECIFICATIONS Type: Screen Resolution: Operation Temperature: Storage Temperature: Backlight: Power Source: Video Display System: Headphone Audio Output: Video Output: TFT Active Matrix LCD 800 x 480 pixels (RGB) 32 to 131 °F (0 to 55 °C) -4 to 158 °F(-20 to 70 °C) LED 12 VDC NTSC/PAL 0.05W @ 32 ohms 1.
NOTES 23
NOTES 24
12 MONTH LIMITED WARRANTY Applies to Movies To Go Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2010 AUDIOVOX,150 Marcus Blvd.
10-Inch Roof-Mount DVD Player With DVD/CD/MP3 SYSTEM AVXMTG10U INSTALLATION GUIDE
TABLE OF CONTENTS Important Notices ......................................................................................................................................... 2 Materials Included in this Package ..................................................................................................... 3 Removing and Installing Snap On Covers ..................................................................................... 4 General Vehicle Installation Approach ................................
IMPORTANT NOTICES Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes anchor points in A, B, C or D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fully deploying which can result in personal injury to vehicle occupants.
MATERIALS INCLUDED IN THIS PACKAGE 1 2 3 4 5 6 7 8 9 10 11 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 10” LCD Overhead Monitor with DVD player 6 Pin Power Harness 2 Pin Power / Wire Harness with Choke 3 RCA Jack Pigtail Hardware Package M5*9 TA4*9 Remote Control Mounting Bracket Snap-on Shroud Snap-on Screen Cover Pry Tool 3.
REMOVING AND INSTALLING SNAP-ON COVERS Preparation Place the unit on a soft surface to avoid damaging the plastic. Materials Required 1. 2. 10” Overhead LCD Monitor with DVD Player 4. 3. Shroud Screen Cover Pry Tool Disconnecting the Screen Cover “C” “A” “B” “C” 1. Open the LCD screen. 2. Insert the supplied pry tool between the LCD screen and snap on screen cover at locations “A”, “B”, and “C” and gently pry the cover away from the screen.
Installing the Screen Cover “D” “D” “D” “D” 1. Open the LCD screen. 2. Hook the two tabs “D” at the bottom edge of the screen cover into the notches on the bottom edge of the LCD screen. 3. Snap the opposite side of the screen cover over the hinges.. Disconnecting the Shroud “E” (fastener) 1. Open the LCD screen. 2. Insert the supplied pry tool between the unit and shroud at fastener location “E” and gently pry the shroud away from the unit.
Installing the Shroud “F” “F” “F” Expanded view 1. Open the LCD screen. 2. Slide the shroud over the unit. The shroud will snap into place at locations “F”.
GENERAL VEHICLE INSTALLATION APPROACH 1. 2. 3. 4. 5. 6. 7. 8. 9. Decide upon the system configuration and options that will be installed. Review all manuals to become familiar with electrical requirements and hookups. Decide upon the mounting locations of all components and the method of mounting. Prep the vehicle. Remove any interior trim necessary to gain access to vehicle's wiring, as well as all areas where interconnecting wire harnesses will be located.
GENERAL VEHICLE INSTALLATION APPROACH Installing Unit to Roof Roof Roof Support Headliner Mounting Bracket Self-drilling Screws Video Unit M5 Screw 8
GENERAL VEHICLE INSTALLATION APPROACH *Optional Relay Box Signal Harness To Dome Lights See “Connecting the Dome Lights” 6 Pin Power Harness 2 Pin Power Wire Harness with Choke AV IN 3 RCA Jack Pigtail 9
CONNECTING THE DOME LIGHTS The dome lights in the video monitor require three connections to the vehicle's wiring. There are two common types of dome light circuits used, positive or negative switched. Positive systems supply voltage to the interior lights to turn them on. Negative switched systems apply ground to illuminate the bulbs. To determine which system you have, you must locate the wires at the dome light.
Positive Switched Dome Lighting To 6 pin connector on Monitor Red/black-Lamp on Black/red-Lamp common Purple/brown-Lamp Auto To constant +12 VDC Factory Door Ajar Switch or Body Control Computer 11 To constant +12 VDC
Negative Switched Dome Lighting To 6 pin connector Red/black-Lamp on Black/red-Lamp common Purple/brown-Lamp Auto To constant +12 VDC To constant +12 VDC Factory Door Ajar Switch or Body Control Computer 12
© 2010 AUDIOVOX,150 Marcus Blvd.
