Installation guide

12
LOADING AND PLAYING DISCS
SETTINGS AND ADJUSTMENTS
1. Press the Screen Release (PRESS) button to unlock the LCD screen. The LCD screen will drop down slightly.
2. Pivot the screen downward until a conformable viewing angle is reached. The hinge friction will hold the screen in position while the unit is in use.
3. Press the power (
) button on the unit or remote control to turn the unit on.
4. Insert a disc into the disc insertion slot with the label facing up towards the headliner.
5. After the unit has been turned on and is displaying a picture, adjust the viewing angle. Pivot the screen to optimize the picture quality.
6. Remember to turn the unit off and pivot the screen to the locked position when not in use.
The General, Password or Preference Setup Page menus contains features and options that let you customize your DVD player. For example, you can choose a
language for the On Screen Display (OSD) or control DVD playback content for children.
Main Menu
TV Display Wide
Angle Mark O
TV Type NTSC
Screen Saver On
OSD Lang ENG
Last Memory On
Go To General Setup Page
- - General Setup Page - -
1. Press the “SETUP” button. The Main Menu will appear on the screen.
2. Press the “
WW” or “XX ” button to select the General, Password or Preference Setup Pages.
3. Press the “OK” button to access the selected setup page.
4. Press the “
S” or “T” cursor button to select a menu item.
5. Press the “
X” cursor button to enter the option submenu.
6. Press the “
S” or “T” cursor button to select an option.
7. Press the “OK” button to confi rm your selection.
8. Press the “
W” cursor button to return to the setup page or the “SETUP” button to exit.