User Guide

-10-
OPERATION
After initial set-up, the amplifier should not require any
further adjustment unless there is a change in the car
stereo or speaker system with which it is used.
1 Power Indicator Lamps
The Power Indicator Lamps will light to indicate that
the unit is connected to the battery and that the Remote
Turn-On terminal is receiving +12 volts, thus turning on
the amplifier.
2 Protection Mode LED
This LED illuminates red to indicate that the self-protection
circuits have been activated and have shut off operation
of the amplifier. The protection circuits may be triggered
9 2
5 6 3 74
1 8