User Guide

ManualsBrandsAudiovox ManualsOther1285620

Model APS-45

Owner's Manual

FEATURES:

w 2 Two Button, 3 Channel RF Transmitters

w Three Channel Code Learning Receiver

w Remote Panic In All Modes

w Built-In Parking Light Output

w LED Status Indicator

w Ignition Door Locking/Unlocking

w Horn Output

OPTIONS

w Remote Trunk Release

w Remote Power Window Control

w Remote Garage Door Interface

w Remote Engine Starter

w Starter Interrupt

w Siren

w Access Guard / 2 Step Unlock

w Illuminated Entry

Page 1

2 Button Remote Keyless Entry System

With Two Auxiliary Outputs

Summary of content (6 pages)

PAGE 1
Model APS-45 Owner's Manual 2 Button Remote Keyless Entry System With Two Auxiliary Outputs FEATURES: w 2 Two Button, 3 Channel RF Transmitters w Three Channel Code Learning Receiver w Remote Panic In All Modes w Built-In Parking Light Output w LED Status Indicator w Ignition Door Locking/Unlocking w Horn Output OPTIONS: w Remote Trunk Release w Remote Power Window Control w Remote Garage Door Interface w Remote Engine Starter w Starter Interrupt w Siren w Access Guard / 2 Step Unlock w Illuminated Entry
PAGE 2
Your APS-45 Keyless Entry System has many features and available options some of which must be selected at time of installation. For your reference, the list on the back page of this manual shows what features and options have been installed with this particular system. Consult your installing dealer for options that may have been installed and are not listed. REMOTE DOOR LOCKING - ACTIVE 1. Turn the engine off, exit the vehicle, and close all doors. 2.
PAGE 3
UNLOCKING THE SYSTEM As you approach the vehicle, press and release the left button on the keychain transmitter, the doors will unlock, the parking lights will flash two times, the vehicle horn (or optional siren) will chirp twice, and the dash mounted LED will turn off. If you have the optional entry illumination circuit installed, the interior light will turn on for 30 seconds or until the ignition key is switched on.
PAGE 4
Note: In the event that you lose your keychain transmitter or the transmitter fails to operate the keyless entry system, the valet switch can be used to override the optional Starter Interrupt, and therefore allow the engine to be started. To override system: 1. Open the door with the vehicle's door key. 2. Turn the ignition switch to the on position. 3. Flip the valet/override switch to the on position. LED will turn on solid.
PAGE 5
NOTE: You may access the Channel 2 command regardless of whether the system is "locked" or "unlocked", but not when the ignition switch is in the on position. This is to prevent the output from accidentally opening the vehicle's trunk when the vehicle is in motion. ADDITIONAL REMOTE FUNCTION CHANNEL 3 The system has an additional output, (Channel 3) ,that can be connected to a number of different optional accessories.
PAGE 6
FEATUREANDFUNCTIONSETTINGS (To Be Completed By Installing Technician) Feature Passive/Active Arming Ignition Door Locking ON/OFF Ignition Door Unlocking ON/OFF Chirps ON/OFF Passive Door Locking Horn/Siren Output Door Lock/Unlock Pulses Function Lock/Unlock Panic Remote Trunk Release Remote WindowClose Remote Garage Door Opening Remote Engine Starter q q q q q q q Passive q ON q ON q ON q ON q Horn q 800ms D/L Pulse q q q q q q Button 1 q Button 1 Button 1 Button 1 Button 1 Button 1 Setting Active OFF