User Guide

ManualsBrandsAudiovox ManualsOther1285780E

128-5780E

8 of 48

travelling in a new area where you are not familiar

with the local stations.

bobo

STATION PRE-SET MEMORIES

To set any of the 6 pre-set memories in each band,

use the following procedure:

1. Turn the radio on and select the desired band.

2. Select the first station to be pre-set using the

Manual Up/Down or Automatic Seek Tuning

Controls

bm.

3. Press the pre-set button ("1-6") to be set and

continue to hold it in. After approximately 2

seconds, the pre-set number will appear on the

display panel, indicating that the station is now

set into that pre-set memory position. The station

can now be recalled at any time by pressing

that button.

4. Repeat the above procedure for the remain in

pre-sets on that band and for the other 4 bands

on the unit.

bpbp

bp LIQUID CRYSTAL DISPLAY PANEL

FUNCTIONS

The Liquid Crystal Display (LCD) panel displays the

frequency, time, and all activated functions, including

five bar graphs which provide a visual representation

of the volume level and the left and right channel

balance levels. The volume level is represented by

three thin bar graphs. As the volume is increased,

the number of illuminated segments will increase.

The left and right channels are represented by the

wider bar graphs. As the strength of the signal ap-

plied to either the left or right channel increases, the

number of illuminated segments will increase.

NOTE: It is a characteristic of LCD panels that, if

subjected to cold temperatures for an

extended period of time, they may take longer

to illuminate than under normal conditions. In

addition, the visibility of the numbers on the

LCD may slightly decrease. The LCD

read-out will return to normal when the

temperature increases to a normal range.

bqbq

bq DISC SLOT

With the label surface facing up, gently insert the

disc into the slot until the soft-loading mechanism

engages and disc play begins. The indication

illuminates and becomes animated, the IN

symbol lights, and the track number and elapsed

time will appear on the display panel.

CAUTION: This unit is designed for play of

standard 5" (12cm) Compact Discs

ONLY. Do not attempt to use 3" (8cm)

CD-Singles in this unit, either with or

without an adaptor, as damage to the

player and/or disc can occur. Such

damage will not be covered by the

Warranty on this product.

brbr

br TRACK SELECT

These buttons are used to quickly select the beginning

of a particular track. With each momentary tap of

the Forward Track Select button (+ ), the next

higher track number will be selected as shown on the

display panel. Similarly, with each momentary tap of

the Backward Track Select button (

-), the next

lower track number will be selected.

bsbs

bs CUE/REVIEW FUNCTIONS

High-speed audible search to any section of the

disc can be made by the Cue and Review functions.

Press and hold the Cue button (+ ) to advance

rapidly in the forward direction or the Review button

( -) to advance rapidly in the backward direction.

During either function, the elapsed time within each

track will automatically be shown on the display panel.

btbt

bt CD TRACK ONE POSITION (TOP) SELECTOR

During disc play, press this button to return to begin-

ning of first track on disc. Disc counter will return to

zero and "TRACK" number 01 will appear on dis-

play panel.

bubu

bu REPEAT PLAY SELECTOR (RPT)

During disc play, press this button to repeat the play

of the selected track (“RPT” will appear on the

display panel). Play of the track will continue to

repeat until the button is pressed again and the “RPT”

indication disappears from the display panel. Repeat

Play mode will also be cancelled by activating the

Random Play cl or Track Scan cm functions.

clcl

cl RANDOM PLAY SELECTOR (SHF)

During disc play, press this button to play the tracks

on the disc in a random or shuffled order (“RND”)

will appear on the display panel). In Random Play

mode, pressing the Forward Track Select (+ )

or Backward Track Select ( -) will also select

tracks in a random order instead of the normal pro-

gression. Additional presses will select tracks in

random order. The Random Play mode can be

cancelled by pressing the button again (“RND”)

indication will disappear from the display panel) or

by activating the Repeat Play bu or Track Scan cm

functions.

cmcm

cm TRACK SCAN (SCN)

During disc play, press this button to play the first 10

seconds of each track on the disc (“SCAN” will ap-

OPEROPER

OPER

ING INSTRUCING INSTRUC

ING INSTRUC

IONSIONS

IONS