LCD TV Owner's Manual FPE3000 Before operating the unit, please read this manual thoroughly.
Contents Congratulations on your purchase of this LCD TV. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Picture adjustment................................24 Sound adjustment...................................25 System Setup........
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose this unit in the rain or spatter by liquid. Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
This TV set operates on power of 120V, 60Hz. You must not use a power supply of any other type. When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product.
Identification of controls Front Remote sensor On/Standby Indicator Light SOURCE MENU To enter into MENU CH CH VOL Channel up VOL Volume up Volume down Channel down To select input signal 8 POWER Power on/ Standby
Back VIDEO L S-VIDEO Y Cb Cr Y Pb Pr VGA PHONE ANT IN R LINE IN R L R L L HDTV AV VIDEO L S-VIDEO Y Cb Cr Y Pb Pr VGA DC +24V +12V +5V PHONE ANT IN R LINE IN R L R L L HDTV AV VGA input Antenna input Video input S-video input DVD input (480i) HDTV YPbPr inputs (480p, 720p,1080i) DC input from power supply 9 Speaker outputs Earphone jack PC audio line in Audio inputs HDTV Audio inputs
Identification of controls(continued) Remote Control power on/Standby Sound mute Channel up Volume down Volume up To enter into MENU Colour/ sound system select Zoom mode select Auto correct picture Channel down To exit/selectOSD menu Sleep timer Clock/Timer setting Previous channel (recall) Picture mode select On-screen display (info) Keypad To select MONO/SAP/ STEREO (TV only) Video Input select Still picture OSD position select Adjusting Treble Adjusting Bass 10
Battery installation Effective remote range Please install the batteries before using the remote control unit. 1 Open the battery cover. 30 30 2 16FT Install two "AAA" batteries matching the +/- polarities of the battery to the +/marks. 3 Notes: There should be no obstacle between the TV and the transmitter. Use the remote control within the effective range as the above figure. If the remote control does not work, please check whether the batteries are exhausted or the polarity is wrong.
Antenna connection CABLE TV (CATV) CONNECTION A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. Terminal. Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
Installation Power connection Before using this equipment, please connect the AC power adapter correctly. VIDEO L S-VIDEO Y Cb Cr Y Pb Pr VGA PHONE ANT IN R LINE IN R L R L L HDTV AV - + Household power outlet Plug into AC outlet. AC cord AC power adapter 1. Connect the female plug to the AC socket on AC adapter. 2. Connect the AC adapter to the DC power input of the set. 3. Connect the male plug to the wall outlet as illustrated.
Installation(continued) Connecting video/audio equipment S-VIDEO Y Cb Cr Y Pb Pr VGA DC +24V +12V +5V PHONE ANT IN LINE IN R L R L L R HDTV AV Y Yellow (video) W white (audio L/MONO) R red (audio R) To S-video input w R R W To audio Y inputs To video input R w To audio inputs To audio outputs To video output VHS Video equipment with S-video terminal Y VHS To audio outputs w R To ANT output Video equipment without S-video terminal To ANT output 14 To ANT input VIDE
Installation(continued) Connecting DVD player and speakers VIDEO L S-VIDEO Cb Y Cr Pb Y Pr VGA DC +24V +12V +5V PHONE ANT IN R LINE IN L R R L HDTV AV To YCbCr G inputs B R To YCbCr outputs G B R R R w w To speaker Red To audio inputs Black Red To speaker To audio outputs DVD DVD Player W White (audio L/MONO) R Red (audio R, Cr) G Green (Y) B Blue (Cb) VIDEO L S-VIDEO Y Cb Cr Y Pb Pr VGA PHONE ANT IN R HDTV AV 15 L LINE IN R L R L L
Installation(continued) Connecting YPbPr terminals VIDEO L S-VIDEO Y Cb Cr Y Pb Pr VGA DC +24V +12V +5V PHONE ANT IN LINE IN L R HDTV AV To YPbPr inputs W White (audio L/MONO) R Red (audio R, Pr) G Green (Y) B Blue (Pb) To YPbPr outputs (480p/720p/ 1080i) G G B B R R R R w w To audio inputs To audio outputs SET TOP BOX (Or other equipment with YPbPr output terminals) 16 R L R L
Installation(continued) Connecting VGA interface VIDEO L S-VIDEO Y Cb Cr Y Pb Pr VGA DC +24V +12V +5V PHONE ANT IN R LINE IN R L R L L HDTV AV To LINE in To VGA input interface Equipment with VGA output interface To LINE out To VGA output interface 17
Installation(continued) Elevation adjustment You can adjust the angle of the LCD TV as follows. o o The elevation can be adjusted from -5 to +10 .
Menu Introduction Press MENU button to call up menu, press MENU button repeatedly to select different menu pages. In MENU operations, the CH5/6buttons are used to select item upwards or downwards; the VOL+/- buttons are used to Menu overview in TV mode PICTURE setting menu To adjust the picture's brightness. PICTURE SETTING 50 Brightness Contrast Color Sharpness Tint 50 To adjust the picture's contrast. 50 50 50 or key to change To adjust the picture's color saturation.
Menu Introduction(continued) CCD and Vchip settings menu (in TV mode) CCD and Vchip SETTINGS CCD Mode setting CCD Background Video Rating Settings Off Transparent _ _ _ _ or key to change Press to switch between Caption, text and TV modes for Closed-Captioned programs. To select background for CCD display. Input a password to enter into Vchip menu. Input the password Vchip menu RATING SETTING MOVIE RATING ... ... ...
Turning On/Off / Selecting input signal Turning On TV 1. Connect the power, the red indicator lights up, the set is in STANDBY mode. 2. Press the POWER button on the unit's control panel or the button on the remote control to turn the set on. Turning Off With the power on, press the POWER button to turn off the set, and the set is in standby mode. * Always unplug the AC adapter from the product and power outlet when not using for a long period of time. Notes: This TV set can automatically turn off by: 1.
Operations in TV mode Channel Preset To enter into CHANNEL SETTING menu CHANNEL SETTING Auto search Source Current Prog Skip Auto fine tune Antenna 12 ON OFF 1. Press MENU button repeatedly to display CHANNEL SETTING menu. 2. Press CH5 or CH6 button to select item. 3. Press VOL+ or VOL- button to confirm or adjust selected item. or key to change Antenna / Cable selection Enter into CHANNEL SETTING menu and select Source item. Press VOL- or VOL+ button to select Antenna or Cable.
Channel Select 8 Use 0-9 digit buttons Use 0-9 digit buttons to select one-digit channel number. 5 - -5 Press ENTER button Press 0-9 button To select two-digit channel: - -5 Press 0-9 button Press 0-9 button -51 51 Press ENTER button To select three-digit channel: - -1 Press 0-9 button Press 0-9 button -11 Press 0-9 button 110 Note: the period of two-press should be within 3 seconds.
Picture adjustment Adjusting picture PICTURE SETTING Brightness Contrast Color Sharpness Tint 50 50 50 50 50 1. Press MENU button to display PICTURE SETTING menu. 2.Press CH5/6 button to select item. or key to change Item VOL- VOL+ Brightness Contrast Color Sharpness Tint darker weaker paler softer purplish lighter stronger deeper sharper greenish The adjusted settings are stored in the User mode. There are three preset picture modes and one User-set picture mode. Press the P.
Sound adjustment Adjusting Sound SOUND Bass Treble Balance MTS 25 25 25 MONO 1. Press MENU button repeatedly to display SOUND menu. 2.Press CH5/6 button to select item. or key to change Item VOL- Bass Treble weaker weaker decreases the right channel Balance VOL+ stronger stronger decreases the left channel MONO/SAP/STEREO MTS Notes: !You can quickly adjust Bass and Treble by using Bass+/ Bassand Treb+/Treb- buttons on the remote.
System setup To enter into SETUP menu SETUP Color sys Language OSD position OSD background AUTO Eng Upper Left Opaque 1. Press MENU button repeatedly to display SETUP menu. 2. Press CH5 or CH6 button to select item. 3. Press VOL+ or VOL- button to confirm or adjust selected item. or key to change Color system In AV mode, you can select color system. From the SETUP menu, press CH5/6to select Color sys item.
System setup(continued) SETUP Color sys Language OSD position OSD background AUTO Eng Upper Left Opaque or key to change Setting OSD position From the SETUP menu, press CH5/6to select OSD position item. Press VOL- or VOL+ button to select an OSD position in your preference. Notes: You can quickly select OSD menu position by using OSD POSITION button on the remote. Setting OSD Background From the SETUP menu, press CH5/6to select OSD Background item.
Timer setting Use SLP button Turn off 0 Press SLP button repeatedly to set sleep time between: 0, 10, 20, 30, 60, 90,120,180,240 minutes. If you select 0 minute, it means the sleep timer function is turned off. Use CLK button Press CLK button, the Current time menu bar appears. Use CH5/6 to select hour or minute (the selected item is displayed in white), use VOL+/- to set the current time.
CCD setting CCD and Vchip SETTINGS CCD Mode setting CCD Background Video Rating Settings Off Transparent _ _ _ _ or key to change To enter into CCD and Vchip SETTINGS menu 1. Press MENU button repeatedly to display CCD and Vchip SETTINGS menu. 2. Press CH5 or CH6 button to select item. 3. Press VOL+ or VOL- button to confirm or adjust selected item. Closed captions From the CCD and Vchip SETTINGS menu, press CH5/6to select CCD Mode setting item.
V-chip setting V-Chip enables parents to prevent their children from watching inappropriate material on TV. V-Chip reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals ), then denies access to programming if the program's rating meets the limitations you select. In this case, the program will be blocked. To enter into RATING SETTING menu 1. Press MENU button repeatedly to display CCD and Vchip SETTINGS menu. 2.
V-chip setting TV RATING setup TV Parental Guidelines may have one or more letters added to the basic rating to let parents know when a show contains higher levels of violence, sex, adult CCD and Vchip SETTINGS 1. Enter into RATING SETTING menu. 2. Press CH5 or CH6 button to select TV Block Settings item. 3. Press VOL + or VOL- button to enter into TV RATING sub-menu. 4. Press VOL+ or VOL- button to select the desired rating. 5.
Adjustment in YPbPr mode To enter into YPbPr mode YPbPr Repeatedly press button on the remote control or SOURCE button on the set's panel until the screen display YPbPr, which indicates that the set is in YPbPr mode. Connect the YPbPr terminals to Set Top Box and make sure there is signal input. Adjusting picture In YPbPr mode when there is correct input signal, press MENU button and PICTURE SETTING menu appears. Use CH5/6to select item and VOL+/- to adjust.
Adjustment in PC mode To enter into PC mode PC Repeatedly press button on the remote control or SOURCE button on the set's panel until the screen display PC, which indicates that the set is in PC mode. PC signal format Please connect VGA input and be sure that there is VGA input signal. The signal format should be one of the follows: 640X480 @60Hz 800X600 @60Hz 1024X768 @60Hz 1280X768@60Hz We recommend you to use 1024X768 @60Hz (4:3) or 1280X768@60Hz (16:9) so that the set can obtain the best picture.
Adjustment in PC mode (continued) PICTURE SETTING Brightness Contrast Phase Frequency Color Temp 25 25 25 25 9300K When there is correct input signal, press MENU button and PICTURE SETTING menu appears. Use CH5/6 to select item and VOL+/- to adjust. Adjusting brightness and contrast or key to change You can adjust brightness and contrast in PC mode and this adjustment does not affect the brightness and contrast in TV and AV mode.
S pec ific ations Display Features Features Display type TFT-LCD High Definition R eady (HDTV) Screen Size 30 inches (29.5" diagonal) High Contrast R atio Aspect R atio 15:9 High Brightness (cd/?) R esolution (native) 1280 x 768 Excellent Viewing angle Brightness * 450cd/? Digital Comb Filter Contrast ratio * 500 Hi-R esolution Component, S-video, Composite, R F, VGA Viewing Angle 85/85/85/85 Parental Control with V-Chip Dot Pitch 0.1675(H) x 0.5025(V) mm Closed Captions (CC) Maximum Color 16.
PRINTED IN RECYCLED PAPER 43 128-7081
