AUDI0 rO~ 1 ELECTRONICS CORP. Vehicle Wireless Rear Observation System Model:ACA240 Installation/User Mantial F eaturE~ s: • • • • • 2.5" LCD Color Display 2.
VVarnings --------------------------------------- ------------------- 2 Product Description --------------------------------------- ------- 3 Packing List --------------------------------------- --------------- 3 Installation Instructions --------------------------------------- --- 4 Monitor Installation ---------------- ------------------------- 4 Camera Installation ----------------------------------------·-- 6 Operating the System 8 Testing the System ---·· --·---·-- ·-----·-·-··-·--·-·- · -· -·----· -
This product is intended to assist in safe driving and to allow the driver to have a broader rear view while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to your local traffic regulations. Do not use any features of this system to the extent it distracts you from safe driving. Your first priority while driving should always be the safe operation of your vehicle.
The ACA240 Wireless Vehicle Rear Observation System is designed to assist the driver by providing a clear and wide image of the area behind the vehicle whenever the vehicle is shifted into reverse. Never rely solely on this product to ensure the area is clear of children and/or obstructions. Use your monitor and look both ways. This product is not intended to replace existing safety procedures, but rather to add an additional safety tool for your vehicle.
Installation Instructions COMPLETELY READ THIS MANUAL BEFORE INSTALLATION NOTE: We have included all of the items needed for most standard installations, but all vehicles are different. We recommend you review your vehicle completely before starting. Monitor Installation Mounting the Monitor The monitor with flexible mounting pad and double sided tape mounts on either the vehicle windshield or dashboard. Note: The double sided tape supplied is extremely strong. Be sure of the position before mounting.
2.Advanced Hard Wire Installation: Audiovox recommends using a qualified professional for the Hard Wired cable installation. CAUTION: Insure that all wires are run safely and do not interfere with Airbags, Safety Devices, or any other equipment. a) Choose a source that only has power when the vehicle ignition is on. Check with a meter or test lamp (can be purchased at an auto parts store). After determining your power location; turn off the ignition and disconnect the battery to insure your safety.
1. Remove the rear license plate to determine the best way to run the power wires to the reverse lights. It is important to use the Reverse lights and not the License Plate illumination lamp or any other. The system is designed to come on when the vehicle is in reverse gear only. Improper installation can cause the system to not work or to run at undesired times. Note: All vehicles are designed differently.
to ensure no wires or mechanisms interfere or could be damaged during drilling. Check for interference with license plate lights and the hatch release switch or mechanism. If not using an existing factory grommet, drill a hole to match the rubber grommet size that you intend to use (13/32" minimum) at the selected location near the vehicle's rear license plate. Route the camera cable connector through the grommet and insert the grommet into the hole to prevent water from entering into the vehicle. 3.
6.U sing the tap connector supplied, perform the following steps: i. Place the un-stripped positive lead wire on the run channel. ii. Insert the un-stripped red power wire completely. 111. Fold the tap connector back over the wires and make the connection by crimping the u-contact down flush with the plastic insulator. IV. Close the top hinged cover until latched. 7 .Attach the black wire to the ground. i. Place the un-stripped ground lead wire on the run channel. ii.
Note: Because this is a wireless system, the monitor is always watching for a video signal. It is possible to receive signals from other cameras. Systems such as Security camera's, Baby monitors, and even other Back up camera systems can trigger the monitor to briefly turn on. This is normal for wireless products. If you find you have too much activation due to video signals in your area, use the included Monitor Power wire and run it to the rear of the vehicle.
General Power Supply DC12V Power Consumption <6W Current Draw <400mA Operating Temperature Range OOC to 50°C Fuse 2Amps Display System Screen 2.5" LCD Color Brightness 400 cd/m Contrast Ratio 150:1 Backlight Life 10000 hours Resolution 960X234 Video Format NTSC Display Format 16: 9 2 Wireless Reception System Operating Frequency Maximum Range 2.4GHz 15 Feet Range depends on installation, vehicle type, interference, and other 2.
Though your monitor requires little care, you will still need to maintain its condition and performance by following the guidelines below. • Keep your system away from excessive moisture, extreme heat or cold. • Keep liquids away from the display. • Occasionally clean the surface of the monitor with a soft cloth moistened with water or glass cleaner. Symptoms Solutions The Monitor is not on after the vehicle is started and the vehicle 1s 1n reverse !.Check the monitor wiring and connections 2 .
,.. ~AUDIO"l""O~ ~ 12 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
, ...,_____ For Customer Service Visit Our Website At WWW.IUdiOVOX.CODI Product Information, Photos, FAQ's Owner's Manuals ©2008 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y.
Thank you for purchasing an Audiovox product. We pride ourselves on the quality and reliability of all our electronic products but if you ever need service or have a question, our customer service staff stands ready to help. Contact us at www.audiovox.com V'PURCHASE REGISTRATION: Registering On-line will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act. AUDI01'0~ fr&~ ~ELECTRONICS CORP. Registel Online at: WWW.AUDIOVOX.